विलंबित निकास रणनीति: प्रतीक्षा की कला

RSI ATR VOLUME PATTERN
निर्माण तिथि: 2025-09-08 13:38:17 अंत में संशोधित करें: 2025-09-08 13:38:17
कॉपी: 7 क्लिक्स: 236
2
ध्यान केंद्रित करना
319
समर्थक

विलंबित निकास रणनीति: प्रतीक्षा की कला विलंबित निकास रणनीति: प्रतीक्षा की कला

क्या यह रणनीति काम कर रही है?

क्या आप जानते हैं? ज्यादातर व्यापारियों में एक दोष है कि वे नकारात्मक संकेतों को देखते हैं और तुरंत भाग जाते हैं! 😱 लेकिन यह रणनीति इसके विपरीत काम करती है, यह आपको बताती है, “जल्दी मत करो, इंतजार करो और देखो!

यह एक रणनीति है जो 3 K लाइनों की प्रतीक्षा करती है, यह देखने के लिए कि क्या यह वास्तव में “ब्रेक अप” है या यह सिर्फ भावनात्मक अभिव्यक्ति है।

मूल तर्क: आवेग के बिना निर्णय लेना

प्रवेश की शर्तें

  • उच्च-निचला ब्रेक मोड की खोज करें
  • K लाइन के साथ पुष्टि की गई है
  • बहुआयामी स्कोर प्रणालीः आरएसआई गतिशीलता + लेनदेन की पुष्टि + अस्थिरता विश्लेषण
  • प्रवेश के लिए न्यूनतम स्कोर 3.0 है (अधिकतम स्कोर 5.0)

ध्यान दें!इस तरह की रेटिंग प्रणाली सुपर-स्मार्ट है, और इसमें शामिल हैंः

  • K लाइन की ताकत (एंटिटी अनुपात)
  • क्या लेन-देन बढ़ेगा?
  • क्या RSI उचित सीमा में है?
  • वर्तमान अस्थिरता स्तर

देर से खेलना बुद्धिमानी है

पारंपरिक रणनीति: हार के संकेतों को देखते हुए, तुरंत खेलें यह रणनीतिः विफलता संकेत देखें → 3 के लाइनों की प्रतीक्षा करें → फिर से पुष्टि करें → तर्कसंगत प्रदर्शन

क्यों देरी?

  1. धोखाधड़ी से बचेंबाजार में अक्सर धोखाधड़ी होती है, देरी से शोर को फ़िल्टर किया जा सकता है
  2. कम लेन-देनप्रसंस्करण शुल्क में कमी:
  3. जीतने की दर बढ़ाएं#GivingTrendsMoreTime: ट्रेंड को और अधिक समय दें

️ जोखिम प्रबंधनः सख्त होने पर कभी भी नरम नहीं होना चाहिए

हालांकि यह एक “बौद्धिक” प्रदर्शन है, लेकिन जोखिम नियंत्रण बहुत सख्त हैः

  • रोकना1.5 गुना एटीआर (समायोज्य)
  • थकावट2.5 गुना एटीआर (अनुकूली)
  • लेन-देन समयकेवल अमेरिकी शेयरों के कारोबार के समय
  • समापन बंदकभी भी रात भर नहीं रुकना।

विज़ुअलाइज़ेशन डिज़ाइनः एक नज़र में

  • हरी त्रिभुजः सामान्य रूप से कई संकेत
  • 🔴 लाल त्रिभुज: सामान्य रिक्त सिग्नल
  • उच्च गुणवत्ता वाला संकेत (रेटिंग ≥4.5)
  • ऑरेंज एक्सः प्रारंभिक विफलता के संकेत (अनदेखा)
  • 🔴 लाल X: विफलता के संकेत में देरी ((खेल शुरू करना)

गड्ढे से बचने के लिए गाइडयदि आप ऑरेंज एक्स को देखते हैं, तो घबराएं नहीं, यह एक “झूठी चेतावनी” है जिसे रणनीतिक रूप से अनदेखा किया गया है!

लागू परिदृश्य

यह रणनीति विशेष रूप से उपयुक्त हैः

  • शहर में भूकंप
  • ट्रेडर्स जो बार-बार घाटे से परेशान नहीं होना चाहते हैं
  • सिग्नल की गुणवत्ता में सुधार के लिए निवेशक
  • दिन के कारोबार के शौकीन

याद रखेंः धैर्य एक व्यापारी का सबसे बड़ा हथियार है, और कभी-कभी “इन्तजार करना और फिर चलना” “तुरंत कार्य करना” से बेहतर होता है!

रणनीति स्रोत कोड
/*backtest
start: 2025-08-08 00:00:00
end: 2025-09-07 00:00:00
period: 1h
basePeriod: 1h
exchanges: [{"eid":"Futures_Binance","currency":"ETH_USDC"}]
*/

//@version=6
strategy("Delayed X Exit Strategy - Final Version", overlay=true)

// === INPUTS ===
// Strategy Settings
delayBars = input.int(3, "Delay X Exit (bars after entry)", minval=1, maxval=10, group="Exit Strategy")
showScores = input.bool(true, "Show Signal Scores", group="Display")
minScore = input.float(3.0, "Minimum Score to Trade", minval=1.0, maxval=5.0, step=0.1, group="Strategy")
volumePeriod = input.int(20, "Volume Average Period", group="Strategy")

// Risk Management
stopATRMult = input.float(1.5, "Stop Loss ATR Multiplier", minval=0.5, maxval=3.0, step=0.1, group="Risk Management")
targetATRMult = input.float(2.5, "Take Profit ATR Multiplier", minval=1.0, maxval=5.0, step=0.1, group="Risk Management")

// Time Filters - US Market Hours Only
startHour = input.int(9, "Start Trading Hour", minval=0, maxval=23, group="Time Filter")
endHour = input.int(16, "End Trading Hour", minval=0, maxval=23, group="Time Filter")
startMinute = input.int(30, "Start Trading Minute", minval=0, maxval=59, group="Time Filter")

// === TIME FILTER - MARKET HOURS ONLY ===
currentHour = hour(time, "America/New_York") 
currentMinute = minute(time, "America/New_York")
marketOpen = (currentHour == startHour and currentMinute >= startMinute) or (currentHour > startHour and currentHour < endHour)
inTradingHours = marketOpen

// --- Original Pattern Detection ---
lowPoint      = ta.lowest(low, 3)
prevLowPoint  = ta.lowest(low[3], 3)
isHigherLow   = low == lowPoint and low > prevLowPoint
bullConfirm   = isHigherLow and close > open

highPoint     = ta.highest(high, 3)
prevHighPoint = ta.highest(high[3], 3)
isLowerHigh   = high == highPoint and high < prevHighPoint
bearConfirm   = isLowerHigh and close < open

// --- Pattern Failures (X signals) ---
failHigherLow = isHigherLow[1] and low < low[1]
failLowerHigh = isLowerHigh[1] and high > high[1]

// Track entry information for delayed exit logic
var int entryBar = na
var string entryDirection = na
var float entryPrice = na

// === ENHANCED SCORING SYSTEM ===
rsi = ta.rsi(close, 14)
atr = ta.atr(14)
avgVolume = ta.sma(volume, volumePeriod)

// Scoring components (optimized for delayed exits)
bullCandleStrength = bullConfirm ? (close > open and (close - open) / (high - low) > 0.6 ? 1 : 0.5) : 0
bearCandleStrength = bearConfirm ? (close < open and (open - close) / (high - low) > 0.6 ? 1 : 0.5) : 0
volumeConfirm = volume > avgVolume * 1.2 ? 1 : (volume > avgVolume ? 0.5 : 0)
bullMomentum = bullConfirm ? (rsi > 25 and rsi < 65 ? 1 : (rsi < 75 ? 0.5 : 0)) : 0
bearMomentum = bearConfirm ? (rsi > 35 and rsi < 75 ? 1 : (rsi > 25 ? 0.5 : 0)) : 0
currentRange = high - low
volatilityScore = currentRange > atr * 0.7 ? 1 : 0.5

// Pattern quality (more lenient for delayed exits)
recentBullSignals = ta.barssince(bullConfirm)
recentBearSignals = ta.barssince(bearConfirm)
bullPatternQuality = bullConfirm ? (na(recentBearSignals) or recentBearSignals > 2 ? 1 : 0.5) : 0
bearPatternQuality = bearConfirm ? (na(recentBullSignals) or recentBullSignals > 2 ? 1 : 0.5) : 0

// Calculate total scores
bullScore = bullConfirm ? bullCandleStrength + volumeConfirm + bullMomentum + volatilityScore + bullPatternQuality : 0
bearScore = bearConfirm ? bearCandleStrength + volumeConfirm + bearMomentum + volatilityScore + bearPatternQuality : 0

// === TRADE SIGNALS ===
longSignal = bullConfirm and bullScore >= minScore and inTradingHours
shortSignal = bearConfirm and bearScore >= minScore and inTradingHours

// === STRATEGY ENTRIES ===
if longSignal and strategy.position_size == 0
    strategy.entry("LONG", strategy.long, qty=1)
    entryBar := bar_index
    entryDirection := "LONG"
    entryPrice := close
    
if shortSignal and strategy.position_size == 0
    strategy.entry("SHORT", strategy.short, qty=1)
    entryBar := bar_index
    entryDirection := "SHORT"
    entryPrice := close

// === DELAYED EXIT LOGIC ===
// Only consider X exits if they occur delayBars+ after entry
shouldExitOnDelayedFailure = false
barsAfterEntry = na(entryBar) ? 0 : bar_index - entryBar

if strategy.position_size != 0 and not na(entryBar) and barsAfterEntry >= delayBars
    // Check for pattern failure that matches our position direction
    if strategy.position_size > 0 and failHigherLow
        shouldExitOnDelayedFailure := true
    if strategy.position_size < 0 and failLowerHigh  
        shouldExitOnDelayedFailure := true

// Execute delayed failure exits
if shouldExitOnDelayedFailure
    if strategy.position_size > 0
        strategy.close("LONG", comment="Delayed X Exit")
    if strategy.position_size < 0
        strategy.close("SHORT", comment="Delayed X Exit")
    entryBar := na
    entryDirection := na
    entryPrice := na

// === STANDARD STOP/TARGET EXITS ===
// Only use stop/target if we haven't exited on delayed failure
if strategy.position_size > 0 and not shouldExitOnDelayedFailure  // Long position
    stopLevel = strategy.position_avg_price - (atr * stopATRMult)
    targetLevel = strategy.position_avg_price + (atr * targetATRMult)
    strategy.exit("LONG_EXIT", "LONG", stop=stopLevel, limit=targetLevel)

if strategy.position_size < 0 and not shouldExitOnDelayedFailure  // Short position  
    stopLevel = strategy.position_avg_price + (atr * stopATRMult)
    targetLevel = strategy.position_avg_price - (atr * targetATRMult)
    strategy.exit("SHORT_EXIT", "SHORT", stop=stopLevel, limit=targetLevel)

// Reset entry tracking when position closes
if strategy.position_size == 0 and not na(entryBar)
    entryBar := na
    entryDirection := na
    entryPrice := na

// End of day exit
if not inTradingHours and strategy.position_size != 0
    strategy.close_all(comment="EOD")
    entryBar := na
    entryDirection := na
    entryPrice := na

// === VISUAL ELEMENTS ===

// Main entry signals
plotshape(longSignal, "Long Entry", shape.triangleup, location.belowbar, 
          color=color.new(color.lime, 0), size=size.normal)
plotshape(shortSignal, "Short Entry", shape.triangledown, location.abovebar, 
          color=color.new(color.red, 0), size=size.normal)

// Premium signals (score >= 4.5)
premiumLong = longSignal and bullScore >= 4.5
premiumShort = shortSignal and bearScore >= 4.5

plotshape(premiumLong, "Premium Long", shape.flag, location.belowbar, 
          color=color.new(color.aqua, 0), size=size.large)
plotshape(premiumShort, "Premium Short", shape.flag, location.abovebar, 
          color=color.new(color.fuchsia, 0), size=size.large)

// Pattern failures - Orange for early (ignored), Red for delayed (actionable)
earlyFailure = (failHigherLow or failLowerHigh) and not na(entryBar) and barsAfterEntry < delayBars
actionableFailure = (failHigherLow or failLowerHigh) and not na(entryBar) and barsAfterEntry >= delayBars

plotshape(earlyFailure, "Early X (Ignored)", shape.xcross, location.abovebar, 
          color=color.new(color.orange, 0), size=size.small)
plotshape(actionableFailure, "Delayed X (Exit)", shape.xcross, location.abovebar, 
          color=color.new(color.red, 0), size=size.normal)

// Entry confirmation arrows
plotarrow(longSignal ? 1 : shortSignal ? -1 : 0, 
          colorup=color.new(color.green, 30), colordown=color.new(color.red, 30))

// === ENHANCED POSITION VISUALIZATION ===
var line stopLine = na
var line targetLine = na  
var label positionLabel = na
var label delayLabel = na

if strategy.position_size != 0
    
    // Draw position lines and labels
    if strategy.position_size > 0  // Long position
        stopPrice = strategy.position_avg_price - (atr * stopATRMult)
        targetPrice = strategy.position_avg_price + (atr * targetATRMult)
        
        // Show delay status
        delayText = barsAfterEntry < delayBars ? 
                   "X Ignored (" + str.tostring(barsAfterEntry) + "/" + str.tostring(delayBars) + ")" : 
                   "X Active (" + str.tostring(barsAfterEntry) + " bars)"
        delayLabel := label.new(bar_index, high + (atr * 2), delayText, 
                              color=barsAfterEntry < delayBars ? color.orange : color.red, 
                              textcolor=color.white, size=size.small)
    
    if strategy.position_size < 0  // Short position
        stopPrice = strategy.position_avg_price + (atr * stopATRMult)
        targetPrice = strategy.position_avg_price - (atr * targetATRMult)

        
        // Show delay status  
        delayText = barsAfterEntry < delayBars ? 
                   "X Ignored (" + str.tostring(barsAfterEntry) + "/" + str.tostring(delayBars) + ")" : 
                   "X Active (" + str.tostring(barsAfterEntry) + " bars)"
        delayLabel := label.new(bar_index, low - (atr * 2), delayText, 
                              color=barsAfterEntry < delayBars ? color.orange : color.red, 
                              textcolor=color.white, size=size.small)


// === ALERTS ===
alertcondition(longSignal, title="Long Entry", message="LONG Entry Signal Triggered")
alertcondition(shortSignal, title="Short Entry", message="SHORT Entry Signal Triggered")
alertcondition(shouldExitOnDelayedFailure, title="Delayed X Exit", message="Pattern Failure Exit - Delayed Strategy")
alertcondition(premiumLong, title="Premium Long", message="PREMIUM LONG Signal - High Probability Setup")
alertcondition(premiumShort, title="Premium Short", message="PREMIUM SHORT Signal - High Probability Setup")