Live Robot Billing and Top-up

Billing

• Live robots are billed by the hour at 0.05 USD per robot per hour; a partial hour counts as a full hour.
• Billing starts when the robot is created, and starting it prepays the first hour, so a robot cannot start if the account balance is insufficient. Stopping or restarting a robot does not bill it twice.
• If the balance runs out while a robot is running, the platform stops the robot; when a rented strategy expires, the robots using it are stopped as well.
• Servers rented with one-click docker rental are billed separately from live robots (see Platform Basics → Docker → Deploy Docker → One-Click Docker Rental).

Bills and balance alerts

• The billing page shows the balance, top-up records and every billing item.
• Under balance alert in account settings, set an alert threshold: when the available balance drops below it you get an email and WeChat notification (at most once every 24 hours unless you top up or change the setting); 0 turns the alert off.

Top-up
Choose the payment method and amount on the billing page. When topping up with USDT, check carefully:

• The transfer network must match the network selected on the billing page; TRC20, ERC20 and BSC are supported. ERC20 and BSC addresses both start with 0x and look the same, which makes them the easiest to mix up.
• The asset is USDT.
• The destination address is the one shown on the billing page.