For example, accesshttps://app.uniswap.org/#/pools/536461The number of GRT/ETH in it
The Little DreamIn addition to the above, I have written an article about the need to use specific contractual methods, which I plan to put in the library.
The Little DreamYou can try this: https://www.fmz.com/digest-topic/10146
The Little DreamThe code is just an example, and the specific content needs to be analyzed.
dancinglife86I'm not sure what the corresponding amount of GRT and ETH I want in the result is.
dancinglife86ABI_UniswapV3Router is the same as the one I was looking for https://etherscan.io/address/0x68b3465833fb72A70ecDF485E0e4C7bD8665Fc45#code inside, ABI_NonfungiblePositionManager is different, please ask where to look for it?
The Little DreamIt must be that ABI is wrong, or the method of calling it is misspelled, use the code I sent above to test if it works. What's up? ABI_Uniswap:"V3Router:":"inputs:":":[{"internalType":"address","name:"_factoryV2",:"Type:":":":"Type:":":":"Mutability:":":"Type:":":"Differential:":":"Differential:":"type:":":":"Address:":"Type:":":"Type:":":":"Differential:":"Type:":":"Differential:"Type:"Type:"Type:"Type:":":"Type:":"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Type:"Ty ABI_NonfungiblePositionManager = `[{"inputs":[{"internalType":"address","name":"_factory","type:":"address"},{"internalType:":":"address","name""WETH9","type:"address"},{"internal","type","address","name":"_tokenDescriptor_type",":"address"}],"stateMutability:":"nonpayable","type:":"constructor"},{"anonymous:":":"Type:":":"false",:":":"inputs:":":"type:":":":":":":":"type:":":":":":":":":":"type:":":":":":":":":"type:":":":":":":":"type:":":":":":":"type:":":":":":"type:":":":":":"o", "type:":":":"address","name""WETH9","type:":":"WETH9","type","type:":":":":"address","type:":":":":"","type:":" const UniswapV3RouterAddress = "0x68b3465833fb72A70ecDF485E0e4C7bD8665Fc45" This is a list of all the routers that are available on Uniswap. function main (()) { // The address of the wallet to be queried // const walletAddress = exchange.IO (("address") const walletAddress = "0x28df8b987BE232bA33FdFB8Fc5058C1592A3db26" This is a list of all wallet addresses. // Get the address of the positionManager contract for Uniswap V3 Exchange.IO (("abi", UniswapV3RouterAddress, ABI_UniswapV3Router) is a free and open-source web server developed by UniSwap. const NonfungiblePositionManagerAddress = exchange.IO (("api", UniswapV3RouterAddress, "positionManager") This is a list of all the different ways Uniswap is credited in the database. Log ((("NonfungiblePositionManagerAddress:", "NonfungiblePositionManagerAddress") is the name of the log file that is used to access the log. // ABI of the registered positionManager contract ABI_NonfungiblePositionManager is a non-fungible position manager that can be used for any number of purposes. // Queries the number of Uniswap V3 positions NFTs owned by the current account This is a list of all the different ways NonfungiblePositionManagerAddress is credited in the database. Log (("nftBalance:", nftBalance) is the name of the game. What do you mean? // query the TokenId of these NFTs var nftTokenIds = [] This is the first time for (var i = 0 ; i < nftBalance; i++) { var nftTokenId = exchange.IO (("api", NonfungiblePositionManagerAddress, "tokenOfOwnerByIndex", walletAddress, and i) The nftTokenIds.push (nftTokenId) is the name of the nft token. Log (("nftTokenId:", nftTokenId) " is the name of the I'm not going anywhere. // Queries liquidity position details based on positions NFT's tokenId var positions = [] for (var i = 0; i < nftTokenIds.length; i++) { var pos = exchange.IO (("api", NonfungiblePositionManagerAddress, "positions", nftTokenIds[i]) is the name of the server that is used to manage the exchange. Log (("pos:", pos) is the name of the game. // Parse the position data This is a list of all the different ways Positions.push is credited in the database. I'm not going anywhere. What do you mean? var tbl = { type: "table", title: "LP", Cols: ["pair", "fee", "lower", "upper", "liquidity"], and then the cols are called by the name of the column. rows: positions I'm not going anywhere. LogStatus (("`" + JSON.stringify ((tbl) + "`") I'm not going anywhere. var tokens = {} function init (()) { var res = JSON.parse ((HttpQuery (("https://tokens.coingecko.com/uniswap/all.json")) ") Log (("fetch", res.tokens.length, "tokens from", res.name) _.each ((res.tokens, function ((token) {) is the name of the function If you want to change the symbols, you can change the symbols. name: token.symbol, decimals: token. decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals, decimals address: token.address I'm not going anywhere. It's not. Log (("tokens:", tokens) is the name of the file. I'm not going anywhere. function parse PosData ((posData) is defined as { /* {pos (192,210) } "nonce": "0", 'operator': "0x000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 "token1": "0xc02aaa39b223fe8d0a0e5c4f27ead9083c756cc2", "fee": "3000", and "fee": "feeGrowthInside0LastX128": "552824104363438506727784685971981736468", which is the most recent version of the fee. "feeGrowthInside1LastX128": "2419576808699564757520565912733367379", which is the most recent version of the fee. "tokensOwed0": "0", "tokensOwed1": "0", "token0": "0x1f9840a85d5af5bf1d1762f925bdaddc4201f984", "TickLower": "-62160", which is the number of ticks in the system. "TickUpper": "-41280", which is the same as the "TickUpper". "Liquidity": "19090316141441365693" is the name of the file. I'm not going anywhere. */ What do you mean? This is the value of var. This is the value of var. for (var symbol in tokens) { if (tokens[symbol].address == posData.token0) { is the value of token0Symbol = tokens[symbol] This is the symbol of the token } else if (tokens[symbol].address == posData.token1) { token1Symbol = tokens[symbol] This is the symbol of the token I'm not going anywhere. I'm not going anywhere. Return [token0Symbol.name + "_" + token1Symbol.name, posData.fee / 10000 + "%", posData.tickLower, posData.tickUpper, and posData.liquidity] This is a list of all the symbols that are used in the database. I'm not going anywhere. What's up? This is on the Ethereum network.
dancinglife86Error /upload/asset/14e3b9c329f0e6d2b7e09.jpg 2 methods are not registered, is ABI looking for it right? https://etherscan.io/address/0x68b3465833fb72A70ecDF485E0e4C7bD8665Fc45#code looking for here
The Little DreamIn the screenshot you sent, there is a copy of ABI button in the upper right corner. Copy immediately. The uniswap on the other chains should be the same.
dancinglife86/upload/asset/14e185e563e61cd155424.jpg Please ask ABI_UniswapV3Router ABI_NonfungiblePositionManager is it possible to copy the contents of the image? Then if you change the chain like the Arbitrum chain, do you need to change other parameters besides the added RPC address? For example: https://app.uniswap.org/#/pools/711084
The Little DreamIf you need to get into the exchange pool, hold your own, the following code: What's up? const ABI_UniswapV3Router = ` is too long omitted to fill in specific ABI` const ABI_NonfungiblePositionManager = ` is too long omitted to fill in specific ABI` const UniswapV3RouterAddress = "0x68b3465833fb72A70ecDF485E0e4C7bD8665Fc45" This is a list of all the routers that are available on Uniswap. function main (()) { // const walletAddress = exchange.IO (("address") const walletAddress = "or specify the wallet address" // get positionManager address Exchange.IO (("abi", UniswapV3RouterAddress, ABI_UniswapV3Router) is a free and open-source web server developed by UniSwap. const NonfungiblePositionManagerAddress = exchange.IO (("api", UniswapV3RouterAddress, "positionManager") This is a list of all the different ways Uniswap is credited in the database. Log ((("NonfungiblePositionManagerAddress:", "NonfungiblePositionManagerAddress") is the name of the log file that is used to access the log. ABI_NonfungiblePositionManager is a non-fungible position manager that can be used for any number of purposes. This is a list of all the different ways NonfungiblePositionManagerAddress is credited in the database. Log (("nftBalance:", nftBalance) is the name of the game. What do you mean? var nftTokenIds = [] This is the first time for (var i = 0 ; i < nftBalance; i++) { var nftTokenId = exchange.IO (("api", NonfungiblePositionManagerAddress, "tokenOfOwnerByIndex", walletAddress, and i) The nftTokenIds.push (nftTokenId) is the name of the nft token. Log (("nftTokenId:", nftTokenId) " is the name of the I'm not going anywhere. var positions = [] for (var i = 0; i < nftTokenIds.length; i++) { var pos = exchange.IO (("api", NonfungiblePositionManagerAddress, "positions", nftTokenIds[i]) is the name of the server that is used to manage the exchange. positions.push ((pos)) Log (("pos:", pos) // pos is each liquidity holding information, which can be parsed specifically for the data in it. I'm not going anywhere. I'm not going anywhere. What's up? The article will be updated in the library later.
The Little DreamYes, I need to write a specific example of debriefing, you can follow this post.
dancinglife86Can you help me solve it first? No, thank you.