Chiến lược đảo ngược dài hạn dựa trên Chỉ số biến động cuối cùng


Ngày tạo: 2023-09-13 17:32:53 sửa đổi lần cuối: 2023-09-13 17:32:53
sao chép: 5 Số nhấp chuột: 687
1
tập trung vào
1617
Người theo dõi

Phương pháp này được gọi là Phương pháp đa chiến lược dựa trên sự đảo ngược của chỉ số biến động cuối cùng. Phương pháp này sử dụng chỉ số biến động cuối cùng để đánh giá tình trạng quá mua quá bán và thực hiện nhiều hoạt động ngược thị trường khi chỉ số đạt đến tình trạng quá bán.

Chỉ số biến động cuối cùng kết hợp thông tin về giá của nhiều chu kỳ để đánh giá mức độ quá mua quá bán của thị trường. Khi chỉ số vượt quá mức thấp, nó cho thấy thị trường bước vào trạng thái quá bán, cho thấy giá có thể tăng trở lại.

Các giao dịch được thực hiện theo cách sau:

  1. Khi chỉ số biến động cuối cùng vượt qua mức thấp (ví dụ: 45), cho thấy thị trường đã bán quá mức và xem xét làm nhiều hơn.

  2. Tiếp tục giữ nhiều vị trí, cho đến khi chỉ số vượt qua đường trung tâm (ví dụ 70), vị trí trơn dừng.

  3. Thiết lập một đường dừng lỗ, nếu giá giảm xuống đường dừng lỗ, bạn sẽ dừng chơi. Nếu chỉ số cho thấy sự khác biệt nhiều đầu, bạn có thể điều chỉnh đường dừng lỗ thích hợp.

  4. Nếu chỉ số giảm trở lại mức thấp, bạn có thể cân nhắc tăng thêm.

Lợi thế của chiến lược này là nắm bắt cơ hội vượt quá giá. Tuy nhiên, các tham số chỉ số cần được tối ưu hóa và các chỉ số tự nó bị tụt hậu, cần được kết hợp với phân tích xu hướng. Giữ lỗ và quản lý tiền cũng đặc biệt quan trọng.

Nhìn chung, sử dụng chỉ số để đánh giá thời gian đảo ngược là một cách phổ biến. Tuy nhiên, các nhà giao dịch vẫn cần giữ sự linh hoạt trong việc đánh giá, không thể hoàn toàn dựa vào bất kỳ chỉ số nào.

Mã nguồn chiến lược
/*backtest
start: 2023-09-11 00:00:00
end: 2023-09-12 00:00:00
period: 5m
basePeriod: 1m
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/

// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © mohanee

//@version=4

strategy(title="Ultimate Oscillator [Long] Strategy",  shorttitle="UO" , overlay=false, pyramiding=2,     default_qty_type=strategy.percent_of_equity,  default_qty_value=20, initial_capital=10000, currency=currency.USD)  //default_qty_value=10, default_qty_type=strategy.fixed,

	
//Ultimate Oscillator logic copied from  TradingView   builtin indicator
/////////////////////////////////////////////////////////////////////////////////
length1 = input(5, minval=1), length2 = input(10, minval=1), length3 = input(15, minval=1)


//rsiUOLength = input(7, title="RSI UO length", minval=1)

signalLength = input(9, title="Signal length", minval=1)

buyLine = input (45, title="Buy Line (UO crossing up oversold at ) ")       //crossover
exitLine = input (70, title="Exit Line (UO crsossing down overbought at) ")      //crossunder


riskCapital = input(title="Risk % of capital", defval=10, minval=1)
stopLoss=input(3,title="Stop Loss",minval=1)

takeProfit=input(false, title="Take Profit")
profitExitLine = input (75, title="Take Profit at RSIofUO crossing below this value ") //crossunder


showSignalLine=input(true, "show Signal Line")
//showUO=input(false, "show Ultimate Oscialltor")


average(bp, tr_, length) => sum(bp, length) / sum(tr_, length)
high_ = max(high, close[1])
low_ = min(low, close[1])
bp = close - low_
tr_ = high_ - low_
avg7 = average(bp, tr_, length1)
avg14 = average(bp, tr_, length2)
avg28 = average(bp, tr_, length3)
ultOscVal = 100 * (4*avg7 + 2*avg14 + avg28)/7
//Ultimate Oscillator 
/////////////////////////////////////////////////////////////////////////////////

//Willimas Alligator  copied from  TradingView built in Indicator
/////////////////////////////////////////////////////////////////////////////////
smma(src, length) =>
	smma =  0.0
	smma := na(smma[1]) ? sma(src, length) : (smma[1] * (length - 1) + src) / length
	smma

//moving averages logic copied from Willimas Alligator -- builtin indicator in TradingView
sma1=smma(hl2,5)
sma2=smma(hl2,20)
sma3=smma(hl2,50)

//Willimas Alligator
/////////////////////////////////////////////////////////////////////////////////

myVwap= vwap(hlc3)

//drawings
/////////////////////////////////////////////////////////////////////////////////
hline(profitExitLine, title="Middle Line 60  [Profit Exit Here]", color=color.purple  , linestyle=hline.style_dashed)

obLevelPlot = hline(exitLine, title="Overbought",  color=color.red , linestyle=hline.style_dashed)
osLevelPlot = hline(buyLine, title="Oversold", color=color.blue, linestyle=hline.style_dashed)

//fill(obLevelPlot, osLevelPlot, title="Background", color=color.blue, transp=90)
//rsiUO = rsi(ultOscVal,rsiUOLength)

rsiUO=ultOscVal

//emaUO = ema(rsiUO, 9)

//signal line
emaUO = ema(ultOscVal , 5)     // ema(ultOscVal / rsiUO, 9)

//ultPlot=plot(showUO==true? ultOscVal : na, color=color.green, title="Oscillator")

plot(rsiUO, title = "rsiUO" ,  color=color.purple)
plot(showSignalLine ? emaUO : na , title = "emaUO [signal line]" ,  color=color.blue)  //emaUO

//drawings
/////////////////////////////////////////////////////////////////////////////////




//Strategy Logic 
/////////////////////////////////////////////////////////////////////////////////

longCond=  crossover(rsiUO, buyLine)  or crossover(rsiUO, 30)


//longCond= ( ema10>ema20 and crossover(rsiUO, buyLine) ) or ( ema10 < ema20 and crossover(rsiUO, 75)  )

//Entry--
//Echeck how many units can be purchased based on risk manage ment and stop loss
qty1 = (strategy.equity  * riskCapital / 100 ) /  (close*stopLoss/100)  

//check if cash is sufficient  to buy qty1  , if capital not available use the available capital only
qty1:= (qty1 * close >= strategy.equity ) ? (strategy.equity / close) : qty1



//strategy.entry(id="LERSIofUO", long=true,   qty=qty1,  when = close > open and  barssince(longCond)<=3  and strategy.position_size<1 )  //and sma1 > sma3)  //  and close>open and  rsiUO >= 25 )   //and


strategy.entry(id="LEUO", long=true,   qty=qty1,  when = close > open and  barssince(longCond)<=3  and strategy.position_size<1  and sma2 > sma3)  //  and close>open and  rsiUO >= 25 )   //and


//Add
//strategy.entry(id="LEUO", comment="Add" , qty=qty1/2 ,  long=true,   when = strategy.position_size>=1 and close < strategy.position_avg_price and crossover(rsiUO, 60) )  //and sma1 > sma3)  //  and close>open and  rsiUO >= 25 )   //and


//strategy.entry(id="LEUO", long=true,   qty=qty1, when = close > open and  barssince(longCond)<=10  and valuewhen(longCond , close , 1)  > close  and rsiUO>=30) //  and close>open and  rsiUO >= 25 )   //and 

//for Later versions
//also check for divergence  ... later version
//also check if close above vwap session

//strategy.entry(id="LEUO", long=false, when = sma1< sma2  and crossunder(rsiUO,60) )

//change the bar color to yellow , indicating startegy will trigger BUY
barcolor( close > open and  barssince(longCond)<=3  and strategy.position_size<1  and sma2 > sma3 ? color.orange : na)


//barcolor(abs(strategy.position_size)>=1 ? color.blue : na )
bgcolor(abs(strategy.position_size)>=1 ? color.blue : na , transp=70)

//signal for addition to existing position 
barcolor( strategy.position_size>=1 and close < strategy.position_avg_price and crossover(rsiUO, 60) ? color.yellow : na)
//bgcolor( strategy.position_size>=1 and close < strategy.position_avg_price and crossover(rsiUO, 60)  ? color.yellow : na, transp=30)

//partial exit
strategy.close(id="LEUO", comment="PExit",  qty=strategy.position_size/3, when= takeProfit and abs(strategy.position_size)>=1 and close > strategy.position_avg_price and crossunder(rsiUO,profitExitLine) )


//close the Long order
strategy.close(id="LEUO", comment="Profit is "+tostring(close - strategy.position_avg_price,  "###.##"), when=abs(strategy.position_size)>=1 and crossunder(rsiUO,exitLine) ) //and close > strategy.position_avg_price )
//strategy.close(id="LEUO", comment="CloseAll", when=abs(strategy.position_size)>=1 and crossunder(rsiUO2,40) ) //and close > strategy.position_avg_price )

// stop loss exit
stopLossVal = strategy.position_size>=1 ?  strategy.position_avg_price * ( 1 - (stopLoss/100) ) : 0.00
strategy.close(id="LEUO", comment="SL exit Loss is  "+tostring(close - strategy.position_avg_price,  "###.##") , when=abs(strategy.position_size)>=1 and close < stopLossVal and rsiUO < exitLine)   
//reason to rsiUO <30 is if price is going down , indicator should reflect it ... but indicator is above 30 means it showing divergence... so hold on it until it crossdown 30 ...that way even Stop Loss less than predefined ...


//Strategy Logic 
/////////////////////////////////////////////////////////////////////////////////