مومینٹم ریورسل موونگ ایوریج امتزاج کی حکمت عملی


تخلیق کی تاریخ: 2023-11-24 10:23:36 آخر میں ترمیم کریں: 2023-11-24 10:23:36
کاپی: 2 کلکس کی تعداد: 667
1
پر توجہ دیں
1617
پیروکار

مومینٹم ریورسل موونگ ایوریج امتزاج کی حکمت عملی

جائزہ

اس حکمت عملی میں رجحانات کی نشاندہی کرنے کے لئے متعدد اوسط لائن اشارے کا استعمال کیا جاتا ہے۔ خاص طور پر ، اس حکمت عملی میں ایک ہی وقت میں تیز اوسط لائن گروپ اور آہستہ اوسط لائن گروپ کا استعمال کیا گیا ہے۔ تیز اوسط لائن گروپ 5 دن کے ای ایم اے اور 25 دن کے ڈبلیو ایم اے پر مشتمل ہے ، اور آہستہ اوسط لائن گروپ 28 دن کے ای ایم اے اور 72 دن کے ڈبلیو ایم اے پر مشتمل ہے۔

حکمت عملی کا اصول

  1. رجحان کی سمت کا تعین کرنے کے لئے دوہری مساوات کا استعمال کریں
    • فوری اوسط لائن مجموعہ: 5 دن ای ایم اے، 25 دن ڈبلیو ایم اے
    • سست رفتار میڈین لائن مجموعہ: 28 دن ای ایم اے، 72 دن ڈبلیو ایم اے
    • جب ایک تیز رفتار اوسط لائن پر ایک سست رفتار اوسط لائن سے گزرتا ہے تو ، خریدنے کا اشارہ پیدا ہوتا ہے
    • جب فاسٹ میڈین لائن کے نیچے سست میڈین لائن سے گزرے تو فروخت کا اشارہ پیدا ہوتا ہے
  2. RSI اشارے کا استعمال کرتے ہوئے خرید و فروخت کا وقت کا تعین کرنے میں معاون
    • RSI کم خرید: جب RSI<35 ہوتا ہے تو خریدنے کا اشارہ ہوتا ہے
    • RSI اعلی فروخت: RSI> 65 فروخت سگنل پیدا کرتا ہے
  3. ٹرینڈ ٹریکنگ میکانزم ، بشمول موبائل اسٹاپ ، موبائل اسٹاپ
    • متحرک اسٹاپ: نقصانات کو بڑھانے سے روکنے کے لئے اعلی / کم قیمتوں کا سراغ لگانا
    • موبائل اسٹاپ: اعلی ترین / کم ترین قیمتوں کا سراغ لگانا ، بروقت اسٹاپ

طاقت کا تجزیہ

  1. ڈبل اوسط لائن کا استعمال کرتے ہوئے رجحانات کا تعین کریں ، آہستہ آہستہ اوسط لائن کا ایک مجموعہ رجحانات کے موڑ کو مؤثر طریقے سے پہچان سکتا ہے
  2. RSI اشارے کا معاون فیصلہ مساوی لائن کو غلط سگنل سے بچنے میں مدد کرتا ہے
  3. موبائل اسٹاپ نقصان کو مؤثر طریقے سے انفرادی نقصان دہ تجارت کے نقصان پر قابو پانے کے لئے
  4. موبائل روکنے کا طریقہ کار منافع کو روکنے اور منافع کو ضائع کرنے سے روکتا ہے

خطرے کا تجزیہ

  1. دوہری مساوات کا فیصلہ ناکام ہونے کا زیادہ امکان ہے ، غلط سگنل ہوسکتا ہے
  2. RSI پیرامیٹرز کی غلط ترتیب سے تجارت کے مواقع ضائع ہوسکتے ہیں
  3. اسٹاپ نقصان کی حد بہت زیادہ ہے ، جس سے غیر ضروری نقصان ہوسکتا ہے
  4. اسٹاپ لمیٹڈ سیٹ بہت چھوٹا ہے، منافع میں کمی کا خطرہ

اصلاح کی سمت

  1. فاسٹ میڈین لائن اور سست میڈین لائن کے پیرامیٹرز کو بہتر بنایا جاسکتا ہے تاکہ بہترین پیرامیٹرز کا مجموعہ تلاش کیا جاسکے
  2. RSI کے پیرامیٹرز کو بھی بہتر بنانے کے لئے بہتر خرید و فروخت کی لائنوں کو تلاش کرنے کے لئے بہتر بنایا جاسکتا ہے
  3. نقصانات کو کم سے کم کرنے اور مجازی سگنل سے بچنے کے درمیان توازن کو تلاش کرنے کے لئے مختلف سٹاپ نقصان کی شدت کا تجربہ کریں
  4. اسٹاپ مارجن کی حکمت عملی کو خود بخود ایڈجسٹ کرنے کی کوشش کریں تاکہ اسٹاپ مارجن خود بخود مارکیٹ کے اتار چڑھاؤ کے مطابق ایڈجسٹ ہوسکے۔

خلاصہ کریں۔

اس حکمت عملی کے ذریعے دو مساوی لائن فیصلہ رجحان کی سمت ، RSI اشارے معاون فیصلے وقت ، اور موبائل سٹاپ نقصان کا طریقہ ، کے رجحان پر کی گرفتاری اور ٹریکنگ کے لئے ممکن بنایا ۔ ۔ ۔ اس حکمت عملی کی مجموعی سوچ واضح ہے ، سمجھنے میں آسان ہے اور اصلاح ، ایک بہت ہی عملی رجحان ٹریکنگ حکمت عملی ہے ۔ ۔

حکمت عملی کا ماخذ کوڈ
/*backtest
start: 2023-11-16 00:00:00
end: 2023-11-23 00:00:00
period: 3m
basePeriod: 1m
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/

//@version=3
strategy(title="[WAI GUA]", shorttitle="[EOS] 1.0", overlay=false )

//study(title="[WAI GUA]", shorttitle="[EOS] 1.0", overlay=true)



//
// Use Alternate Anchor TF for MAs 
uRenko    = input(true, title="IS This a RENKO Chart")
//
anchor     = input(0,minval=0,maxval=1440,title="Alternate TimeFrame Multiplier (0=none)")
//
src          = close //input(close, title="EMA Source")
showRibbons  = input(false,title="Show Coloured MA Ribbons")
showAvgs     = input(false,title="Show Ribbon Median MA Lines")

//
// Fast Ribbon MAs
// Lower MA - type, length
typeF1    = input(defval="EMA", title="FAST MA Ribbon Type: ", options=["SMA", "EMA", "WMA", "VWMA", "SMMA", "DEMA", "TEMA", "LAGMA", "HullMA", "ZEMA", "TMA", "SSMA"])
lenF1     = input(defval=5, title="FAST Ribbon Lower MA Length", minval=1)
gammaF1   = 0.33 //input(defval=0.33,title="Fast MA - Gamma for LAGMA")

// Upper MA - type, length
typeF11   = typeF1 //input(defval="WMA", title="FAST Ribbon Upper MA Type: ", options=["SMA", "EMA", "WMA", "VWMA", "SMMA", "DEMA", "TEMA", "LAGMA", "HullMA", "ZEMA", "TMA", "SSMA"])
lenF11    = input(defval=25, title="FAST Ribbon Upper Length", minval=2)
gammaF11  = 0.77 //input(defval=0.77,title="Slow MA - Gamma for LAGMA")

// Slow Ribbon MAs
// Lower MA - type, length
typeS1   = input(defval="EMA", title="SLOW MA Ribbon Type: ", options=["SMA", "EMA", "WMA", "VWMA", "SMMA", "DEMA", "TEMA", "LAGMA", "HullMA", "ZEMA", "TMA", "SSMA"])
lenS1    = input(defval=28, title="SLOW Ribbon Lower MA Length", minval=1)
gammaS1  = 0.33 //input(defval=0.33,title="Fast MA - Gamma for LAGMA")

// Upper MA - type, length
typeS16   = typeS1 //input(defval="WMA", title="SLOW Ribbon Upper MA Type: ", options=["SMA", "EMA", "WMA", "VWMA", "SMMA", "DEMA", "TEMA", "LAGMA", "HullMA", "ZEMA", "TMA", "SSMA"])
lenS16    = input(defval=72, title="SLOW Ribbon Upper Length", minval=2)
gammaS16  = 0.77 //input(defval=0.77,title="Slow MA - Gamma for LAGMA")

// - Constants
gold = #FFD700

// - FUNCTIONS
// - variant(type, src, len, gamma)
// 返回MA输入选择变量,默认为SMA,如果空白或键入。

// SuperSmoother filter
variant_supersmoother(src,len) =>
    a1 = exp(-1.414*3.14159 / len)
    b1 = 2*a1*cos(1.414*3.14159 / len)
    c2 = b1
    c3 = (-a1)*a1
    c1 = 1 - c2 - c3
    v9 = 0.0
    v9 := c1*(src + nz(src[1])) / 2 + c2*nz(v9[1]) + c3*nz(v9[2])
    v9
    
variant_smoothed(src,len) =>
    v5 = 0.0
    v5 := na(v5[1]) ? sma(src, len) : (v5[1] * (len - 1) + src) / len
    v5

variant_zerolagema(src,len) =>
    ema1 = ema(src, len)
    ema2 = ema(ema1, len)
    v10 = ema1+(ema1-ema2)
    v10
    
variant_doubleema(src,len) =>
    v2 = ema(src, len)
    v6 = 2 * v2 - ema(v2, len)
    v6

variant_tripleema(src,len) =>
    v2 = ema(src, len)
    v7 = 3 * (v2 - ema(v2, len)) + ema(ema(v2, len), len)               // Triple Exponential
    v7
    
//calc Laguerre
variant_lag(p,g) =>
    L0 = 0.0
    L1 = 0.0
    L2 = 0.0
    L3 = 0.0
    L0 := (1 - g)*p+g*nz(L0[1])
    L1 := -g*L0+nz(L0[1])+g*nz(L1[1])
    L2 := -g*L1+nz(L1[1])+g*nz(L2[1])
    L3 := -g*L2+nz(L2[1])+g*nz(L3[1])
    f = (L0 + 2*L1 + 2*L2 + L3)/6
    f

// return variant, defaults to SMA 
variant(type, src, len, g) =>
    type=="EMA"     ? ema(src,len) : 
      type=="WMA"   ? wma(src,len): 
      type=="VWMA"  ? vwma(src,len) : 
      type=="SMMA"  ? variant_smoothed(src,len) : 
      type=="DEMA"  ? variant_doubleema(src,len): 
      type=="TEMA"  ? variant_tripleema(src,len): 
      type=="LAGMA" ? variant_lag(src,g) :
      type=="HullMA"? wma(2 * wma(src, len / 2) - wma(src, len), round(sqrt(len))) :
      type=="SSMA"  ? variant_supersmoother(src,len) : 
      type=="ZEMA"  ? variant_zerolagema(src,len) : 
      type=="TMA"   ? sma(sma(src,len),len) : 
                      sma(src,len)

// - /variant 

// If have anchor specified, calculate the base multiplier.
//mult  = isintraday ? anchor==0 or interval<=0 or interval>=anchor or anchor>1440? 1 : round(anchor/interval) : 1
//mult := isdwm?  1 : mult  // Only available Daily or less
mult = anchor>0 ? anchor : 1 

//
high_  = uRenko? max(close,open) : high
low_   = uRenko? min(close,open) : low


//用锚乘器调整MA长度

//Fast MA Ribbon
emaF1 = variant(typeF1, src, lenF1*mult, gammaF1)
emaF11 = variant(typeF11, src, lenF11*mult,gammaF11)
emafast = (emaF1+emaF11)/2 // Average of Upper and Lower MAs
//
//Slow MA Ribbon
emaS1 = variant(typeS1,src, lenS1*mult,gammaS1)
emaS16 = variant(typeS16, src, lenS16*mult, gammaS16)
emaslow = (emaS1+emaS16)/2 // Average of Upper and Lower MAs
//
// Count crossover candles
xup = 0
xdn = 0
fup = 0
fdn = 0
sup = 0
sdn = 0
// 
xup := (emafast-emaslow)>0 and (emafast-emaslow)>(emafast[1]-emaslow[1]) ? nz(xup[1])+1 : 0
xdn := (emafast-emaslow)<0 and (emafast-emaslow)<(emafast[1]-emaslow[1]) ? nz(xdn[1])+1 : 0
fup := (emaF1-emaF11)>0 and (emaF1-emaF11)>(emaF1[1]-emaF11[1]) ? nz(fup[1])+1 : 0
fdn := (emaF1-emaF11)<0 and (emaF1-emaF11)<(emaF1[1]-emaF11[1]) ? nz(fdn[1])+1 : 0
sup := (emaS1-emaS16)>0 and (emaS1-emaS16)>(emaS1[1]-emaS16[1]) ? nz(sup[1])+1 : 0
sdn := (emaS1-emaS16)<0 and (emaS1-emaS16)<(emaS1[1]-emaS16[1]) ? nz(sdn[1])+1 : 0

//Fast EMA Final Color Rules
colFinal = fup>=2 ? aqua : fdn>=2 ? blue : gray
//Slow EMA Final Color Rules
colFinal2 = sup>=2 ? lime : sdn>=2 ? red : gray

//Fast EMA Plots
p1=plot(showRibbons?emaF1:na, title="Fast Ribbon Lower MA", style=line, linewidth=1, color=colFinal,transp=10)
p2=plot(showRibbons?emaF11:na, title="Fast Ribbon Upper MA", style=line, linewidth=1, color=colFinal,transp=10)
plot(showAvgs?emafast:na, title="Fast Ribbon Avg MA", style=circles,join=true, linewidth=1, color=gold,transp=10)

//
//fill(p1,p2,color=colFinal, transp=90)

//Slow EMA Plots
p3=plot(showRibbons?emaS1:na, title="Slow Ribbon Lower MA", style=line, linewidth=1, color=colFinal2,transp=10)
p4=plot(showRibbons?emaS16:na, title="Slow Ribbon Upper MA", style=line, linewidth=1, color=colFinal2,transp=10)
plot(showAvgs?emaslow:na, title="Slow Ribbon Avg MA", style=circles,join=true, linewidth=1, color=fuchsia,transp=10)
//
//fill(p3,p4, color=colFinal2, transp=90)

// Generate Buy Sell signals, 
buy = 0
sell=0
//
buy  := xup>=2 and sup>=2 and fup>=2 ? nz(buy[1])>0?buy[1]+1  :1 : 0
sell := xdn>=2 and sdn>=2 and fdn>=2 ? nz(sell[1])>0?sell[1]+1 :1 : 0

////////////////////////
//* 反测试周期选择器 *//
////////////////////////

testStartYear = input(2018, "Backtest Start Year",minval=1980)
testStartMonth = input(1, "Backtest Start Month",minval=1,maxval=12)
testStartDay = input(1, "Backtest Start Day",minval=1,maxval=31)
testPeriodStart = timestamp(testStartYear,testStartMonth,testStartDay,0,0)

testStopYear = 9999 //input(9999, "Backtest Stop Year",minval=1980)
testStopMonth = 12 // input(12, "Backtest Stop Month",minval=1,maxval=12)
testStopDay = 31 //input(31, "Backtest Stop Day",minval=1,maxval=31)
testPeriodStop = timestamp(testStopYear,testStopMonth,testStopDay,0,0)

testPeriod() => time >= testPeriodStart and time <= testPeriodStop ? true : false


///////////////
//* RSI策略 *//
///////////////

//指示器 1
lowerpc = lowest(low, 21)
upperpc = highest(high, 21)
midpc = avg(upperpc, lowerpc)

//指示器 2
ma = sma(close, 50)
petd = ema(close,13)
rangema = ema(tr, 50)
upperkc = ma + rangema * 0.25
lowerkc = ma - rangema * 0.25

//指示器 3
up = rma(max(change(close), 0), 5)
down = rma(-min(change(close), 0), 5)
rsi = down == 0 ? 100 : up == 0 ? 0 : 100 - (100 / (1 + up / down))

// PET-D
petdcolor = close > petd ? green : red
barcolor (petdcolor)


//Slope
SlopeL = midpc > midpc[5]
SlopeS = midpc < midpc[5]

//条件
CL = SlopeL == 1 and close > lowerkc and close < midpc and rsi < 35 
CS = SlopeS == 1 and close < upperkc and close > midpc and rsi > 65 

//Setup
RsiSL = CL == 1 and CL[1] != 1
RsiSS = CS == 1 and CS[1] != 1

/////////////////////
//* RSA抛物线指标 *//
/////////////////////
start = input(0.02)
increment = input(0.02)
maximum = input(0.2)

psar = sar(start, increment, maximum)

RSALE = false
RSASE = false
if (psar > high)
    RSALE = true
else
    RSALE = false

if (psar < low)
    RSASE = true
else
    RSASE = false


////////////////
//* 策略组件 *//
////////////////

AQUA = #00FFFFFF
BLUE = #0000FFFF
RED  = #FF0000FF
LIME = #00FF00FF
GRAY = #808080FF
DARKRED   = #8B0000FF
DARKGREEN = #006400FF
//
fastExit  = input(false,title="Use Opposite Trade as a Close Signal")
clrBars   = input(true,title="Colour Candles to Trade Order state")
orderType = input("Longs+Shorts",title="What type of Orders", options=["Longs+Shorts","LongsOnly","ShortsOnly","Flip"])
//
isLong   = (orderType != "ShortsOnly")
isShort  = (orderType != "LongsOnly")

//////////////////////////
//* 贸易状态引擎 *//
//////////////////////////

// 追踪当前贸易状态
longClose = false, longClose := nz(longClose[1],false)
shortClose = false, shortClose := nz(shortClose[1],false)
tradeState = 0, tradeState := nz(tradeState[1])
tradeState := tradeState==0 ?   buy==1 and (barstate.isconfirmed or barstate.ishistory) and isLong and not longClose and not shortClose? 1 :
                               sell==1  and (barstate.isconfirmed or barstate.ishistory) and isShort and not longClose and not shortClose? -1 : 
                          tradeState : tradeState
                          
////////////////////////////////////
//* 在这里设置入口和特殊出口条件 *//
////////////////////////////////////

//进入状态,当状态改变方向时。
longCondition  = false
shortCondition = false
//longCondition  := longCondition != true ? change(tradeState) and tradeState==1 : true
//shortCondition := shortCondition != true ? change(tradeState) and tradeState==-1 : true
longCondition  := change(tradeState) and tradeState==1
shortCondition := change(tradeState) and tradeState==-1
if orderType=="Flip"
    temp = longCondition
    longCondition  := shortCondition
    shortCondition := temp
//end if

// 卖出信号退出
longExitC  =  (emafast[1]<emaslow[1] and open<emaslow[1]) ? 1 : 0
shortExitC = (emafast[1]>emaslow[1] and open>emaslow[1]) ? 1 : 0

// change退出条件。
longExit = change(longExitC) and longExitC==1 and tradeState==1
shortExit = change(shortExitC) and shortExitC==1 and tradeState==-1

// -- debugs
//plotchar(tradeState,"tradeState at Event",location=location.bottom, color=#FF0000FF)
//plotchar(longCondition, title="longCondition",color=#FF0000FF)
//plotchar(shortCondition, title="shortCondition",color=#FF0000FF)
//plotchar(tradeState, title="tradeState",color=#006400FF)
// -- /debugs

////////////////////////////////
//======[ 交易入门价格 ]======//
////////////////////////////////

last_open_longCondition = na
last_open_shortCondition = na
last_open_longCondition := longCondition ? close : nz(last_open_longCondition[1])
last_open_shortCondition := shortCondition ? close : nz(last_open_shortCondition[1])

////////////////////////////
//======[ 位置状态 ]======//
////////////////////////////

in_longCondition  = tradeState == 1 
in_shortCondition = tradeState == -1

////////////////////////
//======[ 尾停 ]======//
////////////////////////

isTS = input(true, "Trailing Stop")
ts = input(3.0, "Trailing Stop (%)", minval=0,step=0.1, type=float) /100

last_high = na
last_low = na
last_high_short = na
last_low_long = na
last_high := not in_longCondition ? na : in_longCondition and (na(last_high[1]) or high_ > nz(last_high[1])) ? high_ : nz(last_high[1])
last_high_short := not in_shortCondition ? na : in_shortCondition and (na(last_high[1]) or high_ > nz(last_high[1])) ? high_ : nz(last_high[1])
last_low := not in_shortCondition ? na : in_shortCondition and (na(last_low[1]) or low_ < nz(last_low[1])) ? low_ : nz(last_low[1])
last_low_long := not in_longCondition ? na : in_longCondition and (na(last_low[1]) or low_ < nz(last_low[1])) ? low_ : nz(last_low[1])

long_ts =  isTS and in_longCondition and not na(last_high) and (low_ <= last_high - last_high * ts) //and (last_high >= last_open_longCondition + last_open_longCondition * tsi)
short_ts = isTS and in_shortCondition and not na(last_low) and (high_ >= last_low + last_low * ts) //and (last_low <= last_open_shortCondition - last_open_shortCondition * tsi)


////////////////////////
//======[ 获利 ]======//
////////////////////////

isTP = input(true, "Take Profit")
tp = input(3.0, "Take Profit (%)",minval=0,step=0.1,type=float) / 100
ttp = input(1.0, "Trailing Profit (%)",minval=0,step=0.1,type=float) / 100
ttp := ttp>tp ? tp : ttp

long_tp =  isTP and in_longCondition  and (last_high >= last_open_longCondition + last_open_longCondition * tp)   and (low_ <= last_high - last_high * ttp)
short_tp = isTP and in_shortCondition and (last_low <= last_open_shortCondition - last_open_shortCondition * tp) and (high_ >= last_low + last_low * ttp)

////////////////////////////
//======[ 停止损耗 ]======//
////////////////////////////

isSL = input(false, "Stop Loss")
sl = input(3.0, "Stop Loss (%)", minval=0,step=0.1, type=float) / 100
long_sl =  isSL and in_longCondition and (low_ <= last_open_longCondition - last_open_longCondition * sl)
short_sl = isSL and in_shortCondition and (high_ >= last_open_shortCondition + last_open_shortCondition * sl)

////////////////////////
//======[ 对峙 ]======//
////////////////////////

//注:短出口信号不重漆,无需用力,如果锥体继续进行。
long_sos = (fastExit or (not isTS and not isSL)) and longExit and in_longCondition
short_sos = (fastExit or (not isTS and not isSL)) and shortExit and in_shortCondition 

////////////////////////////
//======[ 关闭信号 ]======//
////////////////////////////

// 为所有不同的关闭条件创建一个单独的关闭,这里的所有条件都不重漆。
longClose :=  isLong and (long_tp or long_sl or long_ts or long_sos) and not longCondition
shortClose := isShort and (short_tp or short_sl or short_ts or short_sos) and not shortCondition
////////////////////////////
//======[ 情节色彩 ]======//
////////////////////////////

longCloseCol = na
shortCloseCol = na
longCloseCol := long_tp ? green : long_sl ? maroon : long_ts ? purple : long_sos ? orange :longCloseCol[1]
shortCloseCol := short_tp ? green : short_sl ? maroon : short_ts ? purple : short_sos ? orange : shortCloseCol[1]
//
tpColor = isTP and in_longCondition ? lime : isTP and in_shortCondition ? lime : na
slColor = isSL and in_longCondition ? red : isSL and in_shortCondition ? red : na


//////////////////////////////////
//======[ 策略图 ]======//
//////////////////////////////////

plot(isTS and in_longCondition?
     last_high - last_high * ts : na, "Long Trailing", fuchsia, style=2, linewidth=2,offset=1)
plot(isTP and in_longCondition and last_high < last_open_longCondition + last_open_longCondition * tp ? 
     last_open_longCondition + last_open_longCondition * tp : na, "Long TP Active", tpColor, style=3,join=false, linewidth=2,offset=1)
plot(isTP and in_longCondition and last_high >= last_open_longCondition +  last_open_longCondition * tp ? 
     last_high - last_high * ttp : na, "Long Trailing", black, style=2, linewidth=2,offset=1)
plot(isSL and in_longCondition and last_low_long > last_open_longCondition - last_open_longCondition * sl ? 
     last_open_longCondition - last_open_longCondition * sl : na, "Long SL", slColor, style=3,join=false, linewidth=2,offset=1)

plot(isTS and in_shortCondition?
     last_low + last_low * ts : na, "Short Trailing", fuchsia, style=2, linewidth=2,offset=1)
plot(isTP and in_shortCondition and last_low > last_open_shortCondition - last_open_shortCondition * tp ? 
     last_open_shortCondition - last_open_shortCondition * tp : na, "Short TP Active", tpColor, style=3,join=false, linewidth=2,offset=1)
plot(isTP and in_shortCondition and last_low <= last_open_shortCondition -  last_open_shortCondition * tp ? 
     last_low + last_low * ttp : na, "Short Trailing", black, style=2, linewidth=2,offset=1)
plot(isSL and in_shortCondition and last_high_short < last_open_shortCondition + last_open_shortCondition * sl ? 
     last_open_shortCondition + last_open_shortCondition * sl : na, "Short SL", slColor, style=3,join=false, linewidth=2,offset=1)

bclr = not clrBars ? na : tradeState==0 ? GRAY : 
                          in_longCondition ? close<last_open_longCondition? DARKGREEN : LIME :
                          in_shortCondition ? close>last_open_shortCondition? DARKRED : RED : GRAY
barcolor(bclr,title="Trade State Bar Colouring")


//////////////////////////////////
//======[ 战略进入与退出 ]======//
//////////////////////////////////

if testPeriod() and isLong
    strategy.entry("Long", 1, when=longCondition)
    strategy.close("Long", when=longClose )

if testPeriod() and isShort
    strategy.entry("Short", 0,  when=shortCondition)
    strategy.close("Short", when=shortClose )
    
// --- Debugs
//plotchar(longExit,title="longExit",location=location.bottom,color=na)
//plotchar(longCondition,title="longCondition",location=location.bottom,color=na)
//plotchar(in_longCondition,title="in_longCondition",location=location.bottom,color=na)
//plotchar(longClose,title="longClose",location=location.bottom,color=na,color=na)
//plotchar(buy,title="buy",location=location.bottom,color=na)
// --- /Debugs
//开单时改变背景
bgcolor( in_longCondition ? lime : na, transp=90)
bgcolor( in_shortCondition ? red : na, transp=90)

////////////////////////////
//======[ 重置变量 ]======//
////////////////////////////


if longClose or not in_longCondition
    last_high := na
    last_high_short := na
    
if shortClose or not in_shortCondition
    last_low := na
    last_low_long := na
    
if longClose or shortClose
    tradeState := 0
    in_longCondition := false
    in_shortCondition := false

    
//plotchar(tradeState,"tradeState at EOF",location=location.bottom, color=na)
// EOF