Stratégie de capture de tendance des bandes EMA + leledc + bandes Bollinger

Auteur:ChaoZhang est là., Date: 2022-05-09 16:41:29 Je suis désolé
Les étiquettes:Le taux d'intérêt

Les bases: Dans sa forme la plus simple, cette stratégie est une tendance positionnelle suivant une stratégie qui entre en long lorsque le prix dépasse les bandes middle EMA et ferme ou se raccourcit lorsque le prix dépasse les bandes middle EMA. Le haut et le bas des bandes EMA moyennes sont calculés à partir de l'EMA des hauts et des bas des bougies, respectivement.

L'idée est que l'entrée de transactions sur les écarts des EMA élevées et basses plutôt que sur l'EMA typique basée sur la fermeture des bougies donne un peu plus de confirmation de la force de la tendance et minimise le découpage.

Cette stratégie fonctionne sur tous les marchés sur tous les délais, mais en tant que stratégie de suivi des tendances, elle fonctionne mieux sur les marchés sujets aux tendances telles que les crypto-monnaies et les actions technologiques.

L'entrée d'un filtre EMA plus lent peut assurer que les transactions sont entrées conformément aux tendances à plus long terme, l'entrée d'un filtre EMA plus rapide peut servir de confirmation de la force de rupture.

La coloration des barres peut être activée pour identifier rapidement visuellement la direction d'une tendance pour la confluence avec d'autres indicateurs ou stratégies.

Les marchandises: Attendre que la tendance se retourne avant de fermer une transaction (surtout lorsqu'une EMA de base plus longue est utilisée) laisse souvent de l'argent sur la table.

Barres retardées à l'intérieur des bandes moyennes - Lorsque plusieurs bougies s'ouvrent et se ferment entre les bandes moyennes de l'EMA, cela peut indiquer que la tendance est faible ou que la rupture n'est pas le début d'une nouvelle tendance.

Leledc bars - Introduit à l'origine par glaz, il s'agit d'un indicateur d'action de prix qui met en évidence une bougie après que plusieurs barres d'affilée aient fermé dans le même sens et entraîné le plus grand haut / bas au cours d'une période. Il se déclenche souvent lorsqu'une tendance forte s'est arrêtée avant de se poursuivre, ou marque la fin d'une tendance. Pour atténuer la fermeture des faux signaux Leledc, cette stratégie a deux options: 1.

Balises d'épuisement de Bollinger - Ces barres sont mises en évidence lorsque le prix se referme à l'intérieur des bandes de Bollinger et que le RSI se trouve dans des zones de surachat/vente spécifiées. L'idée est qu'une tendance est sur-étendue lorsque le prix se négocie au-delà des bandes de Bollinger. Lorsque le prix se referme à l'intérieur des bandes, il est probable que cela soit dû à une réversion moyenne vers l'EMA de base dans laquelle cette stratégie rentrera idéalement dans une position. Étant donné que les exigences RSI ajoutées rendent souvent cet indicateur trop strict pour déclencher une taille d'échantillon suffisamment grande pour être testée, j'ai trouvé qu'il était préférable d'utiliser des paramètres non standard à la fois pour les bandes et le RSI considéré comme par défaut dans les paramètres.

Zones d'achat/vente - Similaire à l'idée derrière l'utilisation des barres d'épuisement des bandes de Bollinger comme signal de clôture. Au lieu de calculer à partir des écarts standards, les zones d'achat/vente sont calculées à partir de multiples des bandes EMA moyennes. Lors de la négociation au-delà de ces zones et de l'échec ultérieur à l'intérieur, le prix peut être dû à une réversion moyenne vers l'EMA de base. Aucun filtre RSI n'est utilisé pour les zones d'achat/vente.

Si des conditions de clôture précoces sont sélectionnées, il vaut souvent la peine d'autoriser la réentrée des transactions sur le rebond de la bande moyenne de l'EMA.

L'expérimentation de ces conditions peut entraîner un bénéfice net moindre, mais des taux de gain et des ratios d'acuité plus élevés à mesure que moins de temps est consacré aux transactions.

Le mortel: La tendance est votre ami. Mais ne serait-il pas agréable de détecter les tendances tôt? Dans les marchés en évolution (ou lorsque vous utilisez des EMA de base plus lentes dans cette stratégie), attendre la confirmation d'une rupture des bandes EMA vous fera au mieux rater la moitié du mouvement, au pire entraînera une coupure constante.

Il y a deux façons que j'ai trouvées les meilleures d'utiliser les transactions contre-tendance

  1. La sélection parmi les 5 premières conditions de clôture de contre-tendance de la liste déroulante permettra généralement de clôturer les transactions rapidement, avec moins de profit mais moins de risque.
  2. Le choix de n'importe laquelle des conditions proches inférieures aux 5 premières peut amener la stratégie à se comporter comme si elle entrait dans une nouvelle tendance (du mauvais côté).

Cette fonctionnalité peut être mortellement efficace pour profiter de chaque mouvement que le prix fait, ou mortelle pour le PnL de la stratégie si elle n'est pas réglée correctement. Étant donné que les transactions contre-tendance s'ouvrent en face des bandes moyennes, un stop-loss est recommandé pour réduire le risque. Si les stop-loss pour les transactions contre-tendance sont désactivés, la stratégie maintiendra une position ouverte souvent jusqu'à la liquidation sur un marché en tendance si le commerce est hors-jeu. Notez que l'utilisation d'une EMA de base plus lente rend les stop-loss contre-tendance encore plus nécessaires car elle peut réduire l'efficacité du filtre de zone d'achat/vente pour l'ouverture des transactions, car le prix peut passer beaucoup plus de temps en tendance en dehors des zones sélectionnées.

Le créneau: J'ai ajouté une fonctionnalité de défaut dans les longs ou les courts. Les activer avec d'autres fonctionnalités (en plus du long / court de base sur la rupture de la bande moyenne de l'EMA) tend à briser la stratégie d'une manière ou d'une autre. Permettre à la longue défaut de simuler une tentative d'acquisition d'un plus grand nombre d'actifs plutôt que de la devise de base. Activer le default short peut avoir des résultats positifs pour les pièces à forte valeur ajoutée, à forte inflation qui baissent pendant des mois à la fois. Sinon, j'utilise le default short comme couverture pour les pièces que je détiens et enjeux spot. Je gagne l'utilité et le TAEG de mise tout en réduisant le risque de détention de l'actif sous-jacent en maintenant une position neutre nette.la plupartdu temps.

Disclaimer: Ce script est destiné à expérimenter et backtesting différentes stratégies autour des bandes EMA. Utilisez ce script pour votre trading en direct à vos propres risques. Je suis un programmeur débutant, en tant que tel, il peut y avoir des erreurs dans le code qui font que la stratégie ne se comporte pas comme prévu. Pour autant que je puisse le dire, il ne repeint pas, mais je ne peux pas garantir que ce n'est pas le cas. Cela étant dit, s'il y a des questions, des améliorations ou des erreurs que vous avez trouvées, laissez un commentaire ci-dessous!

test de retour

img


/*backtest
start: 2022-04-08 00:00:00
end: 2022-05-07 23:59:00
period: 1h
basePeriod: 15m
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/

// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © danielx888
// Credits to Joy_Bangla for the Leledc exhaustion bar code
// Credits to VishvaP for the 34 EMA bands code
// Credits to SlumdogTrader for the BB exhaustion code (edited for functionality)

//@version=5
//strategy(title='EMA bands + leledc + bollinger bands trend catching strategy w/ countertrend scalp', shorttitle='Trend Pooristics', overlay=true, initial_capital = 1000, commission_value= 0.036, pyramiding= 0, default_qty_type= strategy.percent_of_equity, default_qty_value= 100, margin_long=0, margin_short=0, max_bars_back=200)

EMAlength = input.int(title='EMA Length', defval=34, minval=1, step=1)

//get user inputs
needLong = input.bool(true, title = "Enable middle EMA band breakout: Long", group="Open Conditions")
needShort = input.bool(true, title = "Enable middle EMA band breakdown: Short", group="Open Conditions")
midClose = input.string('Opposite band', title='Close on crosses through middle EMA bands', tooltip='Selecting -Delayed bars inside- will delay closing positions by the specified amount of bars if candles close inside the middle EMA bands but do not breakout the opposite side.', options=['Nearest band', 'Opposite band', 'Delayed bars inside'], group='Close Conditions')
needCTlong = input.bool(false, title = "Enable counter-trend trades: Long", tooltip='Does not work with -default positioning: short- enabled',  group="Counter Trade Settings")
CTlongType = input.string('Leledc', title = 'Trigger', options=['Leledc', 'BB Exhaustion'], group='Counter Trade Settings')
needCTshort = input.bool(false, title = "Enable counter-trend trades: Short", tooltip='Does not work with -default positioning: long- enabled', group="Counter Trade Settings")
CTshortType = input.string('Leledc', title = 'Trigger', options=['Leledc', 'BB Exhaustion'], group='Counter Trade Settings')
alwaysLong = input.bool(false, title = "Enable default positioning: Long", tooltip='Does not work with -Default to short- also selected. Works best when early close conditions are used', group = 'Open Conditions')
alwaysShort = input.bool(false, title = "Enable default positioning: Short", tooltip='Does not work with -Default to long- also selected. Works best when early close conditions are used', group = 'Open Conditions')
s_longBounce = input.bool(false, 'Enable middle EMA band bounce re-entry: Long', tooltip='Works best when early close conditions are used', group= 'Open Conditions')
s_shortBounce = input.bool(false, 'Enable middle EMA band bounce re-entry: Short', tooltip='Works best when early close conditions are used', group= 'Open Conditions')
numBars = input.int(4, title='Delayed close no. of bars', minval=1, maxval=10, step=1, group='Close Conditions')
useSlowEMA = input.bool(false, title='Use slow EMA filter',tooltip='Has no effect on counter-trend trades', group='Open Conditions')
useLele = input.bool(false, title='Close on Leledc bars', group='Close Conditions')
string whichLele = input.string('First', title='Which Leledc bar?', options=['First', 'Second', 'Third', 'Fourth', 'Fifth'], group='Close Conditions')
useBBExtend = input.bool(false, title='Close on Bollinger Band exhaustion bars', tooltip='Bollinger Band Exhaustion bars are candles that close back inside the Bollinger Bands when RSI is overbought or oversold. Settings for both can be changed under the -Bollinger Bands Exhaustion Bar Settings- header.', group='Close Conditions')
string whichBBext = input.string('First', title='Which BB exhaustion bar?', options=['First', 'Second', 'Third'], group='Close Conditions')
reverBandClose = input.bool(false, title='Close on loss of Buy/Sell zone', group='Close Conditions')
whichCTband = input.string(defval = 'Inner', title = 'Leledc/BB must be outside which Buy/Sell zone to open', options=['Inner', 'Outer'], group="Counter Trade Settings")
i_CTlongCloseCond = input.string(title='Closing conditions for counter-trend longs', defval='Cross Top Middle Band', tooltip='-Cross- type close conditions market close position on candle closes above selected region \n\n-Touch- type enable trailing limit orders that follow the selected region', options=['Cross Outer Buy Zone', 'Cross Inner Buy Zone', 'Touch Inner Buy Zone', 'Cross Bottom Middle Band', 'Touch Bottom Middle Band', 'Cross Top Middle Band', 'Touch Top Middle Band', 'Cross Inner Sell Zone', 'Touch Inner Sell Zone', 'Cross Outer Sell Zone', 'Touch Outer Sell Zone', 'First Leledc', 'First BB Exhaustion'], group='Counter Trade Settings')
i_CTshortCloseCond = input.string(title='Closing conditions for counter-trend shorts', defval='First Leledc', tooltip='-Cross- type close conditions market close position on candle closes below selected region \n\n-Touch- type enable trailing limit orders that follow the selected region',options=['Cross Outer Sell Zone', 'Cross Inner Sell Zone', 'Touch Inner Sell Zone', 'Cross Top Middle Band', 'Touch Top Middle Band', 'Cross Bottom Middle Band', 'Touch Bottom Middle Band', 'Cross Inner Buy Zone', 'Touch Inner Buy Zone', 'Cross Outer Buy Zone', 'Touch Outer Buy Zone', 'First Leledc', 'First BB Exhaustion'], group='Counter Trade Settings')
i_CTlongSL = input.float(10, 'Flat stop-loss % for counter-trend longs', 0, 100, 0.1, 'Input 0 to disable stop-loss for counter-trend trades. Enabling stop-loss will not apply to middle band breakout, bounce, or default positional trades',group='Counter Trade Settings')
i_CTshortSL = input.float(10, 'Flat stop-loss % for counter-trend shorts', 0, 100, 0.1, 'Input 0 to disable stop-loss for counter-trend trades. Enabling stop-loss will not apply to middle band breakout, bounce, or default positional trades',group='Counter Trade Settings')


// calculate and plot slow EMA
showSlowEMA = input.bool(false, title='Show Slow EMA', group='Visual Elements')
slowEMAlen = input.int(200, title='Slow EMA Length', step=1, minval=1, group='Open Conditions')
slowEMA = ta.ema(close, slowEMAlen)
plot(showSlowEMA ? slowEMA : na)


maj = input(true, 'Show Leledc Exhausion Bars', group='Visual Elements')


//*****************************
// SlumdogTrader's Bollinger Bands + RSI Double Strategy - Profit Trailer
//====================================================================================================//

///////////// Bollinger Bands Settings
BBlength = input.int(20, minval=1, title='Bollinger Bands SMA Period Length', group='Bollinger Bands Exhaustion Bar Settings')
BBmult = input.float(1.8, minval=0.001, maxval=50, title='Bollinger Bands Standard Deviation', group='Bollinger Bands Exhaustion Bar Settings')
price = input(close, title='Source')
BBbasis = ta.sma(price, BBlength)
BBdev = BBmult * ta.stdev(price, BBlength)
BBupper = BBbasis + BBdev
BBlower = BBbasis - BBdev
source = close
buyEntry = ta.crossover(source, BBlower)
sellEntry = ta.crossunder(source, BBupper)
plot(BBbasis, color=color.new(color.aqua, 0), title='BBs SMA Basis Line', display=display.none)
p1 = plot(BBupper, color=color.new(color.silver, 0), title='BBs Upper Line', display=display.none)
p2 = plot(BBlower, color=color.new(color.silver, 0), title='BBs Lower Line', display=display.none)
//fill(p1, p2, display=display.none)

///////////// RSI Settings
RSIlength = input.int(8, minval=1, step=1, title='RSI Period Length', group='Bollinger Bands Exhaustion Bar Settings')
RSIos = input.int(30, minval=0, maxval=50, step=1,title='RSI Oversold Value', group='Bollinger Bands Exhaustion Bar Settings')
RSIob = input.int(70, minval=50, maxval=100, step=1, title='RSI Overbought value', group='Bollinger Bands Exhaustion Bar Settings')
vrsi = ta.rsi(price, RSIlength)
RSIoverSold = vrsi < RSIos
RSIoverBought = vrsi > RSIob

///////////// Colour Settings
switch1 = input(true, title='Enable Bollinger Bands exhaustion bar coloring', group='Visual Elements')
switch2 = input(false, title='Enable Bollinger bands exhaustion bar background coloring', tooltip='Enabling this can help visualize when dialing in Bollinger Bands and RSI settings', group='Visual Elements')
OSOBcolor = RSIoverBought and price[1] > BBupper and price < BBupper ? color.yellow : RSIoverSold and price[1] < BBlower and price > BBlower ? color.blue : na
bgcolor(switch2 ? color.new(OSOBcolor,70) : na)


///////////// RSI + Bollinger Bands Strategy
//if not na(vrsi)
//
//    if ta.crossover(vrsi, RSIoverSold) and ta.crossover(source, BBlower)
//        strategy.entry('RSI_BB_L', strategy.long, stop=BBlower, oca_type=strategy.oca.cancel, comment='RSI_BB_L')
//    else
//        strategy.cancel(id='RSI_BB_L')
//
//    if ta.crossunder(vrsi, RSIoverBought) and ta.crossunder(source, BBupper)
//        strategy.entry('RSI_BB_S', strategy.short, stop=BBupper, oca_type=strategy.oca.cancel, comment='RSI_BB_S')
//    else
//        strategy.cancel(id='RSI_BB_S')
//
//plot(strategy.equity, title="equity", color=red, linewidth=2, style=areabr)
//====================================================================================================//
//*****************************


//*****************************
// © Joy_Bangla Leledc Exhaustion V4
//====================================================================================================//
//min = input(false, 'Minor Leledc Exhaustion Bar ::  Show')
i_leleVol = input.bool(false, 'Require Volume breakout for Leledc bars', group='Leledc Exhaustion Bar Settings')
i_volMult = input.float(1.5,'Volume Multiplier', 0.1,20,0.1, group='Leledc Exhaustion Bar Settings')
leleVol = volume > ta.sma(volume,100)*i_volMult

leledcSrc = input(close, 'Source', group='Leledc Exhaustion Bar Settings')
maj_qual = input(6, 'Bar count no', group='Leledc Exhaustion Bar Settings')
maj_len = input(30, 'Highest / Lowest', group='Leledc Exhaustion Bar Settings')
//min_qual = input(5, 'Minor Leledc Exhausion Bar ::  Bar count no')
//min_len = input(5, 'Minor Leledc Exhausion Bar ::  Bar count no')
bindexSindex = input(1, 'bindexSindex', group='Leledc Exhaustion Bar Settings')
closeVal = input(4, 'Close', group='Leledc Exhaustion Bar Settings')

lele(qual, len) =>
    bindex = 0
    sindex = 0
    bindex := nz(bindex[bindexSindex], 0)
    sindex := nz(sindex[bindexSindex], 0)
    ret = 0
    if close > close[closeVal]
        bindex += 1
        bindex
    if close < close[closeVal]
        sindex += 1
        sindex
    
    if i_leleVol and not leleVol
        ret := 0
        ret
    else
        if bindex > qual and close < open and high >= ta.highest(high, len)
            bindex := 0
            ret := -1
            ret
        if sindex > qual and close > open and low <= ta.lowest(low, len)
            sindex := 0
            ret := 1
            ret
    return_1 = ret
    return_1

major = lele(maj_qual, maj_len)
//minor = lele(min_qual, min_len)

plotchar(maj ? major == -1 ? high : na : na, char='•', location=location.absolute, color=color.new(color.red, 0), size=size.small)
plotchar(maj ? major == 1 ? low : na : na, char='•', location=location.absolute, color=color.new(color.lime, 0), size=size.small)

//plotchar(min ? minor == 1 ? high : na : na, char='x', location=location.absolute, color=color.new(color.red, 0), size=size.small)
//plotchar(min ? minor == -1 ? low : na : na, char='x', location=location.absolute, color=color.new(color.lime, 0), size=size.small)

//leledcMajorBullish = major == 1 ? low : na
//leledcMajorBearish = major == -1 ? high : na

//leledcMinorBullish = minor == 1 ? low : na
//leledcMinorBearish = minor == -1 ? high : na

//==============================================//

//alertcondition(leledcMajorBullish, title='Major Bullish Leledc', message='Major Bullish Leledc')
//alertcondition(leledcMajorBearish, title='Major Bearish Leledc', message='Major Bearish Leledc')

//alertcondition(leledcMinorBullish, title='Minor Bullish Leledc', message='Minor Bullish Leledc')
//alertcondition(leledcMinorBearish, title='Minor Bearish Leledc', message='Minor Bearish Leledc')
//====================================================================================================//
//*****************************


//*****************************
// © VishvaP 34 EMA Bands v2
//====================================================================================================//

//Constants
//price = close
highShortEMA = ta.ema(high, EMAlength)
lowShortEMA = ta.ema(low, EMAlength)
EMA = ta.ema(close, EMAlength)

//==============================================//

//1D Bands [Not Used]
//bandsHigh = highShortEMA * math.phi
//bandsLow = lowShortEMA * math.rphi

//==============================================//

//Lower reversion zone bands (buy zone)
shortbandsHigh = ((highShortEMA - EMA) * math.phi) * math.pi + EMA
shortbandsLow = (-(EMA - lowShortEMA) * math.phi) * math.pi + EMA

//Lower reversion zone bands smoothed
shortbandsHighEMA = ta.wma(shortbandsHigh, 8)
shortbandsLowEMA = ta.wma(shortbandsLow, 8)

//==============================================//

//Higher reversion zone bands (sell zone)
phiExtensionHigh = ((highShortEMA - EMA) * math.phi) * (math.phi + 4) + EMA
phiExtensionLow = (-(EMA - lowShortEMA) * math.phi) * (math.phi + 4) + EMA

//Higher reversion zone bands smoothed
phiExtensionHighEMA = ta.wma(phiExtensionHigh, 8)
phiExtensionLowEMA = ta.wma(phiExtensionLow, 8)

//==============================================//

//Median zone bands [plot]
highP1 = plot(highShortEMA, color = color.new(color.blue, 100), title = "Top median zone")
lowP1 = plot(lowShortEMA, color = color.new(color.blue, 100), title = "Bottom median zone")
plot(EMA, color = color.new(color.gray, 100), title = "EMA")

//1D bands [not used]
//highP2 = plot(bandsHigh)
//lowP2 = plot(bandsLow)

//Lower reversion zone bands [plot]
highP3 = plot(shortbandsHighEMA, color = color.new(color.yellow, 100), title = "Lower sell zone")
lowP3 = plot(shortbandsLowEMA, color = color.new(color.teal, 100), title = "Higher buy zone")

//Higher reversion zone bands [plot]
phiPlotHigh = plot(phiExtensionHighEMA, color = color.new(color.red, 100), title = "Top sell zone")
phiPlotLow = plot(phiExtensionLowEMA, color = color.new(color.green, 100), title = "Bottom buy zone")


//==============================================//

//Sell zone region [fill]
//fill(phiPlotHigh, highP3, color.new(color.red, 85), title = "Sell zone")

//Buy zone region [fill]
//fill(lowP3, phiPlotLow, color.new(color.green, 85), title = "Buy zone")

//Median zone region [fill]
//fill(highP1, lowP1, color.new(color.gray, 70), title = "Median zone")
//====================================================================================================//
//*****************************

//assign bands for counter trend entry
float CTbandTop = na
float CTbandBottom = na 

if whichCTband == 'Inner'
    CTbandTop := shortbandsHighEMA
    CTbandBottom := shortbandsLowEMA
else 
    CTbandTop := phiExtensionHighEMA
    CTbandBottom := phiExtensionLowEMA

//build variables for open/closing conditions on crosses of middle EMA bands
crossUpTopMB = open < highShortEMA and close > highShortEMA
wiggleUpTopMB = open > highShortEMA and close > highShortEMA and close[1] <= highShortEMA[1]
crossDownTopMB = open > highShortEMA and close < highShortEMA
wiggleDownTopMB = open < highShortEMA and close < highShortEMA and close[1] >= highShortEMA[1]

crossUpBotMB = open < lowShortEMA and close > lowShortEMA
wiggleUpBotMB = open > lowShortEMA and close > lowShortEMA and close[1] <= lowShortEMA[1]
crossDownBotMB = open > lowShortEMA and close < lowShortEMA
wiggleDownBotMB = open < lowShortEMA and close < lowShortEMA and close[1] >= lowShortEMA[1]

crossUpBotInnerRB = open < shortbandsLowEMA and close > shortbandsLowEMA
wiggleUpBotInnerRB = open > shortbandsLowEMA and close > shortbandsLowEMA and close[1] <= shortbandsLowEMA[1]
crossUpBotOuterRB = open < phiExtensionLowEMA and close > phiExtensionLowEMA
wiggleUpBotOuterRB = open > phiExtensionLowEMA and close > phiExtensionLowEMA and close[1] <= phiExtensionLowEMA[1]

crossUpTopInnerRB = open < shortbandsHighEMA and close > shortbandsHighEMA
wiggleUpTopInnerRB = open > shortbandsHighEMA and close > shortbandsHighEMA and close[1] <= shortbandsHighEMA[1]
crossUpTopOuterRB = open < phiExtensionHighEMA and close > phiExtensionHighEMA
wiggleUpTopOuterRB = open > phiExtensionHighEMA and close > phiExtensionHighEMA and close[1] <= phiExtensionHighEMA[1]

crossDownBotInnerRB = open > shortbandsLowEMA and close < shortbandsLowEMA
wiggleDownBotInnerRB = open < shortbandsLowEMA and close < shortbandsLowEMA and close[1] >= shortbandsLowEMA[1]
crossDownBotOuterRB = open > phiExtensionLowEMA and close < phiExtensionLowEMA
wiggleDownBotOuterRB = open < phiExtensionLowEMA and close < phiExtensionLowEMA and close[1] >= phiExtensionLowEMA[1]

crossDownTopInnerRB = open > shortbandsHighEMA and close < shortbandsHighEMA
wiggleDownTopInnerRB = open < shortbandsHighEMA and close < shortbandsHighEMA and close[1] >= shortbandsHighEMA[1]
crossDownTopOuterRB = open > phiExtensionHighEMA and close < phiExtensionHighEMA
wiggleDownTopOuterRB = open < phiExtensionHighEMA and close < phiExtensionHighEMA and close[1] >= phiExtensionHighEMA[1]

longBounce = open > highShortEMA and close > highShortEMA and low < highShortEMA
shortBounce = open < lowShortEMA and close < lowShortEMA and high > lowShortEMA

//build variables for counter trend trades closing conditions
CTlongCloseCond = (i_CTlongCloseCond == 'Cross Inner Sell Zone' ? (crossUpTopInnerRB or wiggleUpTopInnerRB) : (i_CTlongCloseCond == 'Cross Outer Sell Zone' ? (crossUpTopOuterRB or wiggleUpTopOuterRB) : (i_CTlongCloseCond == 'Cross Top Middle Band' ? (crossUpTopMB or wiggleUpTopMB) : (i_CTlongCloseCond == 'Cross Bottom Middle Band' ? (crossUpBotMB or wiggleUpBotMB) : (i_CTlongCloseCond == 'Cross Inner Buy Zone' ? (crossUpBotInnerRB or wiggleUpBotInnerRB) : (i_CTlongCloseCond == 'Cross Outer Buy Zone' ? (crossUpBotOuterRB or crossUpBotOuterRB) : (i_CTlongCloseCond == 'First Leledc' ? major == -1 : (i_CTlongCloseCond == 'First BB Exhaustion' ? OSOBcolor == color.yellow : na))))))))
CTlongTP = (i_CTlongCloseCond == 'Touch Inner Buy Zone' ? shortbandsLowEMA : (i_CTlongCloseCond == 'Touch Top Middle Band' ? highShortEMA : (i_CTlongCloseCond == 'Touch Bottom Middle Band' ? lowShortEMA : (i_CTlongCloseCond == 'Touch Inner Sell Zone' ? shortbandsHighEMA : (i_CTlongCloseCond == 'Touch Outer Sell Zone' ? phiExtensionHighEMA : na)))))

CTshortCloseCond =  (i_CTshortCloseCond == 'Cross Inner Buy Zone' ? (crossDownBotInnerRB or wiggleDownBotInnerRB) : (i_CTshortCloseCond == 'Cross Outer Buy Zone' ? (crossDownBotOuterRB or wiggleDownBotOuterRB) : (i_CTshortCloseCond == 'Cross Bottom Middle Band' ? (crossDownBotMB or wiggleDownBotMB) : (i_CTshortCloseCond == 'Cross Top Middle Band' ? (crossDownTopMB or wiggleDownTopMB) : (i_CTshortCloseCond == 'Cross Inner Sell Zone' ? (crossDownTopInnerRB or wiggleDownTopInnerRB) : (i_CTshortCloseCond == 'Cross Outer Sell Zone' ? (crossDownTopOuterRB or crossDownTopOuterRB) : (i_CTshortCloseCond == 'First Leledc' ? major == 1 : (i_CTshortCloseCond == 'First BB Exhaustion' ? OSOBcolor == color.blue : na))))))))
CTshortTP = (i_CTshortCloseCond == 'Touch Inner Sell Zone' ? shortbandsHighEMA : (i_CTshortCloseCond == 'Touch Bottom Middle Band' ? lowShortEMA : (i_CTshortCloseCond == 'Touch Top Middle Band' ? highShortEMA : (i_CTshortCloseCond == 'Touch Inner Buy Zone' ? shortbandsLowEMA : (i_CTshortCloseCond == 'Touch Outer Buy Zone' ? phiExtensionLowEMA : na)))))

shortMidBreak = crossDownBotMB or wiggleDownBotMB
longMidBreak = crossUpTopMB or wiggleUpTopMB

//==============================================//
//longs open
if needLong
    if useSlowEMA
        if longMidBreak and close > slowEMA and open < highShortEMA
            strategy.entry('Long', strategy.long)
    else if longMidBreak
        strategy.entry('Long', strategy.long)
if strategy.position_size == 0 and s_longBounce
    if useSlowEMA
        if close > slowEMA and longBounce
            strategy.entry('Long', strategy.long)
    else if longBounce
        strategy.entry('Long', strategy.long)
//shorts open
if needShort
    if useSlowEMA
        if shortMidBreak and close < slowEMA and open > lowShortEMA
            strategy.entry('Short', strategy.short)
    else if shortMidBreak
        strategy.entry('Short', strategy.short)
if strategy.position_size == 0 and s_shortBounce
    if useSlowEMA
        if close < slowEMA and shortBounce
            strategy.entry('Short', strategy.short)
    else if shortBounce
        strategy.entry('Short', strategy.short)
//==============================================//

//calculate how many leledc bars between current bar and current position entry
int countLongLele = 0
int countShortLele = 0
int numLele = switch whichLele
    'First' => 1
    'Second' => 2
    'Third' => 3
    'Fourth' => 4
    'Fifth' => 5
int i = 0

//count leles for longs
if strategy.position_size > 0
    if useLele and numLele > 1
        while i <= 200
            if strategy.position_size[i] <= 0
                break
            if bar_index[i] == 0
                break
            if major[i] == -1
                countLongLele += 1 
            if countLongLele == numLele
                break
            i += 1
//count leles for shorts
if strategy.position_size < 0 
    if useLele and numLele > 1
        while i <= 200
            if strategy.position_size[i] >= 0
                break
            if bar_index[i] == 0
                break
            if major[i] == 1
                countShortLele += 1
            if countShortLele == numLele
                break
            i += 1

//countBullLeles() =>
//    count = 0
//    int n = 0
//    while n <= 200 and strategy.position_size[n] > 0
//        if major[n] == -1
//            count += 1
//    return_1 = count
//    return_1
//countBearLeles() =>
//    count = 0
//    int n = 0
//    while n <= 200 and strategy.position_size[n] < 0
//        if major[n] == 1
//            count += 1
//    return_1 = count
//    return_1

//calculate how many BB extension bars between current bar and current position entry
int countLongBBs = 0
int countShortBBs = 0
int numBBs = switch whichBBext
    'First' => 1
    'Second' => 2
    'Third' => 3
int n = 0

//count BB Extension bars for longs
if strategy.position_size > 0
    if useBBExtend and numBBs > 1
        while n <= 200
            if strategy.position_size[n] <= 0
                break
            if bar_index[n] == 0
                break
            if OSOBcolor[n] == color.yellow
                countLongBBs += 1 
            if countLongBBs == numBBs
                break
            n+= 1
//count BB Extension bars for shorts
if strategy.position_size < 0
    if useBBExtend and numBBs > 1
        while n <= 200
            if strategy.position_size[n] >= 0
                break
            if bar_index[n] == 0
                break
            if OSOBcolor[n] == color.blue
                countShortBBs += 1 
            if countShortBBs == numBBs
                break
            n+= 1

//identify bars crossing under extreme overbought/oversold reversion bands for strategy exits and color
showReverBars = input.bool(title='Enable Buy/Sell zone failure bar coloring', defval=false, group='Visual Elements')
whichReverBand = input.string(title='Which Buy/Sell zone?', defval='Inner', options=['Inner', 'Outer'], group='Close Conditions')

float reverBandTop = na
float reverBandBottom = na
if whichReverBand == 'Inner'
    reverBandTop := shortbandsHighEMA
    reverBandBottom := shortbandsLowEMA
else 
    reverBandTop := phiExtensionHighEMA
    reverBandBottom := phiExtensionLowEMA
crossUpRB = open < reverBandBottom and close > reverBandBottom
wiggleUpRB = open > reverBandBottom and close > reverBandBottom and close[1] <= reverBandBottom[1]
crossDownRB = open > reverBandTop and close < reverBandTop
wiggleDownRB = open < reverBandTop and close < reverBandTop and close[1] >= reverBandTop[1]

reverBarColor = crossDownRB or (wiggleDownRB and not crossDownRB[1]) ? color.orange : crossUpRB or (wiggleUpRB and not crossUpRB[1]) ? color.purple : na

//return true after specified number of bars (numBars) closes inside the mid bands but no breakout
inMid = close > lowShortEMA and close < highShortEMA and open > lowShortEMA and open < highShortEMA

isAllMid() =>
    AllMid = true
    for t = 0 to numBars by 1
        if longMidBreak[t] or shortMidBreak[t]
            AllMid := false
    AllMid

//==============================================//
//longs close
if strategy.position_size > 0
    if reverBandClose
        if reverBarColor == color.orange
            strategy.close('Long', comment = 'Close Long')
    if useBBExtend and numBBs == 1
        if OSOBcolor == color.yellow
            strategy.close('Long', comment = 'Close Long')
            if needCTshort and CTshortType == 'BB Exhaustion'
                if open > CTbandTop
                    strategy.entry(id='Counter Trend Short', comment = 'CT Short', direction=strategy.short)
    if useBBExtend and numBBs > 1
        if countLongBBs == numBBs  
            strategy.close('Long', comment = 'Close Long')
            if needCTshort and CTshortType == 'BB Exhaustion'
                if open > CTbandTop
                    strategy.entry(id='Counter Trend Short', comment = 'CT Short', direction=strategy.short)
    if useLele and numLele == 1
        if major == -1
            strategy.close('Long', comment = 'Close Long')
            if needCTshort and CTshortType == 'Leledc'
                if high > CTbandTop
                    strategy.entry(id='Counter Trend Short', comment = 'CT Short', direction=strategy.short)
    if useLele and numLele > 1
        if countLongLele == numLele
            strategy.close('Long', comment = 'Close Long')
            if needCTshort and CTshortType == 'Leledc'
                if high > CTbandTop
                    strategy.entry(id='Counter Trend Short', comment = 'CT Short', direction=strategy.short)
    if midClose == 'Nearest band'
        if crossDownTopMB or wiggleDownTopMB
            strategy.close('Long', comment = 'Close Long')
    if midClose == 'Opposite band'
        if crossDownBotMB or wiggleDownBotMB
            strategy.close('Long', comment = 'Close Long')
    if midClose == 'Delayed bars inside'
        if crossDownBotMB or wiggleDownBotMB
            strategy.close('Long', comment = 'Close Long')
        if isAllMid()
            if open[numBars] > highShortEMA and close[numBars] < highShortEMA and inMid
                strategy.close('Long', comment = 'Close Long')

//shorts close 
if strategy.position_size < 0
    if reverBandClose
        if reverBarColor == color.purple
            strategy.close('Short', comment = 'Close Short')
    if useBBExtend and numBBs == 1
        if OSOBcolor == color.blue
            strategy.close('Short', comment = 'Close Short')
            if needCTlong and CTlongType == 'BB Exhaustion'
                if open < CTbandBottom
                    strategy.entry(id='Counter Trend Long', comment = 'CT Long', direction=strategy.long)
    if useBBExtend and numBBs > 1
        if countShortBBs == numBBs
            strategy.close('Short', comment = 'Close Short')
            if needCTlong and CTlongType == 'BB Exhaustion'
                if open < CTbandBottom
                    strategy.entry(id='Counter Trend Long', comment = 'CT Long', direction=strategy.long)
    if useLele and numLele == 1
        if major == 1
            strategy.close('Short', comment = 'Close Short')
            if needCTlong and CTlongType == 'Leledc'
                if low < CTbandBottom
                    strategy.entry(id='Counter Trend Long', comment= 'CT Long', direction=strategy.long)
    if useLele and numLele > 1
        if countShortLele == numLele
            strategy.close('Short', comment = 'Close Short')
            if needCTlong and CTlongType == 'Leledc'
                if low < CTbandBottom
                    strategy.entry(id='Counter Trend Long', comment= 'CT Long', direction=strategy.long)
    if midClose == 'Nearest band'
        if crossUpBotMB or wiggleUpBotMB
            strategy.close('Short', comment = 'Close Short')
    if midClose == 'Opposite band'
        if crossUpTopMB or wiggleUpTopMB
            strategy.close('Short', comment = 'Close Short')
    if midClose == 'Delayed bars inside'
        if crossUpTopMB or wiggleUpTopMB
            strategy.close('Short', comment = 'Close Short')
        if isAllMid() 
            if open[numBars] < lowShortEMA and close[numBars] > lowShortEMA and inMid
                strategy.close('Short', comment = 'Close Short')
//==============================================//

//counter trend opens and closes
CTlongSL = strategy.position_avg_price * (1 - i_CTlongSL / 100)
CTshortSL = strategy.position_avg_price * (1 + i_CTshortSL / 100)

//CT longs open
if needCTlong and strategy.position_size == 0
    if CTlongType == 'Leledc'
        if major == 1
            if low < CTbandBottom
                strategy.entry(id='Counter Trend Long', comment = 'CT Long', direction = strategy.long)
    else
        if OSOBcolor == color.blue
            strategy.entry(id='Counter Trend Long', comment = 'CT Long', direction = strategy.long)
//CT longs closed
if strategy.position_size > 0 and strategy.opentrades.entry_id(strategy.opentrades - 1) == 'Counter Trend Long'
    if i_CTlongSL > 0
        if na(CTlongTP)
            strategy.exit(id='Counter Trend Long', stop=CTlongSL, comment = 'CT Long SL')
        else
            strategy.exit(id='Counter Trend Long', stop=CTlongSL, limit=CTlongTP, comment = 'CT Long TP/SL')
    else if i_CTlongSL == 0
        strategy.exit(id='Counter Trend Long', limit=CTlongTP, comment = 'CT Long TP')
    if CTlongCloseCond
        strategy.close(id='Counter Trend Long', comment = 'Close CT Long')

//CT shorts open
if needCTshort and strategy.position_size == 0
    if CTshortType == 'Leledc'
        if major == -1
            if high > CTbandTop
                strategy.entry(id='Counter Trend Short', comment = 'CT Short', direction=strategy.short)
    else
        if OSOBcolor == color.yellow
            strategy.entry(id='Counter Trend Short', comment= 'CT Short', direction=strategy.short)
//CT shorts closed
if strategy.position_size < 0 and strategy.opentrades.entry_id(strategy.opentrades - 1) == 'Counter Trend Short'
    if i_CTshortSL > 0
        if na(CTshortTP)
            strategy.exit(id='Counter Trend Short', stop=CTshortSL, comment = 'CT Short SL')
        else
            strategy.exit(id='Counter Trend Short', stop=CTshortSL, limit=CTshortTP, comment = 'CT Short TP/SL')
    else if i_CTshortSL == 0
        strategy.exit(id='Counter Trend Short', limit=CTshortTP, comment = 'CT Short TP')
    if CTshortCloseCond
        strategy.close(id='Counter Trend Short', comment = "Close CT Short")

//default position
if alwaysLong and not alwaysShort and strategy.position_size == 0 
    if useSlowEMA
        if close > slowEMA
            strategy.entry(id='Default Long', comment = 'Default Long', direction=strategy.long)
    else
        strategy.entry(id='Default Long', comment='Default Long', direction=strategy.long)
if alwaysShort and not alwaysLong and strategy.position_size == 0 
    if useSlowEMA
        if close < slowEMA
            strategy.entry(id='Default Short', comment = 'Default Short', direction=strategy.short)
    else
        strategy.entry(id='Default Short', comment='Default Short', direction=strategy.short)
     
//set bar colors 
trendColor = input.bool(title='Enable Trend Bar Color', tooltip='Color bars green when above mid bands, red when below, and gray when inside. Dark green and dark red bars signal a position is kept open from the delayed close settings.', defval=false, group='Visual Elements')
var colorBar = color.new(color.white, 50)
if trendColor
    if switch1
        if showReverBars
            if reverBarColor == color.purple or reverBarColor == color.orange
                colorBar := reverBarColor
            else if OSOBcolor == color.yellow or OSOBcolor == color.blue
                colorBar := OSOBcolor
            else if close > highShortEMA
                if (alwaysShort or needCTshort) and strategy.position_size < 0
                    colorBar := color.new(color.red, 0)
                else
                    colorBar := color.new(color.green, 0)
            else if close < lowShortEMA
                if (alwaysLong or needCTlong) and strategy.position_size > 0
                    colorBar := color.new(color.green, 0)
                else
                    colorBar := color.new(color.red, 0)
            else if strategy.position_size > 0 and (midClose == 'Delayed bars inside' or midClose == 'Opposite band')
                colorBar := color.new(#0a6136, 20)
            else if strategy.position_size < 0 and (midClose == 'Delayed bars inside' or midClose == 'Opposite band')
                colorBar := color.new(#600008, 20)
            else
                colorBar := color.new(color.gray, 0)
        else
            if OSOBcolor == color.yellow or OSOBcolor == color.blue
                colorBar := OSOBcolor
            else if close > highShortEMA
                if (alwaysShort or needCTshort) and strategy.position_size < 0
                    colorBar := color.new(color.red, 0)    
                else    
                    colorBar := color.new(color.green, 0)
            else if close < lowShortEMA
                if (alwaysLong or needCTlong) and strategy.position_size > 0
                    colorBar := color.new(color.green, 0)
                else
                    colorBar := color.new(color.red, 0)
            else if strategy.position_size > 0 and (midClose == 'Delayed bars inside' or midClose == 'Opposite band')
                colorBar := color.new(#0a6136, 20)
            else if strategy.position_size < 0 and (midClose == 'Delayed bars inside' or midClose == 'Opposite band')
                colorBar := color.new(#600008, 20)
            else
                colorBar := color.new(color.gray, 0)
    else if showReverBars
        if reverBarColor == color.purple or reverBarColor == color.orange
            colorBar := reverBarColor
        else if close > highShortEMA
            if (alwaysShort or needCTshort) and strategy.position_size < 0
                colorBar := color.new(color.red, 0)
            else
                colorBar := color.new(color.green, 0)
        else if close < lowShortEMA
            if (alwaysLong or needCTlong) and strategy.position_size > 0
                colorBar := color.new(color.green, 0)
            else    
                colorBar := color.new(color.red, 0)
        else if strategy.position_size > 0 and (midClose == 'Delayed bars inside' or midClose == 'Opposite band')
            colorBar := color.new(#0a6136, 20)
        else if strategy.position_size < 0 and (midClose == 'Delayed bars inside' or midClose == 'Opposite band')
            colorBar := color.new(#600008, 20)
        else
            colorBar := color.new(color.gray, 0)
    else
        if close > highShortEMA
            if (alwaysShort or needCTshort) and strategy.position_size < 0
                colorBar := color.new(color.red, 0)
            else    
                colorBar := color.new(color.green, 0)
        else if close < lowShortEMA
            if (alwaysLong or needCTlong) and strategy.position_size > 0
                colorBar := color.new(color.green, 0)
            else    
                colorBar := color.new(color.red, 0)
        else if strategy.position_size > 0 and (midClose == 'Delayed bars inside' or midClose == 'Opposite band')
            colorBar := color.new(#0a6136, 20)
        else if strategy.position_size < 0 and (midClose == 'Delayed bars inside' or midClose == 'Opposite band')
            colorBar := color.new(#600008, 20)
        else
            colorBar := color.new(color.gray, 0)
else if switch1 
    if showReverBars
        if reverBarColor == color.purple or reverBarColor == color.orange
            colorBar := reverBarColor
        else if OSOBcolor == color.yellow or OSOBcolor == color.blue
            colorBar := OSOBcolor
        else 
            colorBar := na
    else
        if OSOBcolor == color.yellow or OSOBcolor == color.blue
            colorBar := OSOBcolor
        else 
            colorBar := na
else if showReverBars
    if reverBarColor == color.purple or reverBarColor == color.orange
        colorBar := reverBarColor
    else
        colorBar := na
else
    colorBar := na

//barcolor(colorBar)



Relationnée

Plus de